help with the new gaming build

Om1zzle

Limp Gawd
Joined
Feb 24, 2005
Messages
145
https://secure.newegg.com/NewVersion/WishList/MySavedWishDetail.asp?ID=4370971

Antec P180 - $130

ABIT IP35 Pro LGA 775 Intel P35 ATX Intel Motherboard - $180

EVGA 8800GTX - $517

CORSAIR CMPSU-620HX ATX12V v2.2 and EPS12V 2.91 620W Power Supply - $170

Intel Core 2 Duo E6850 Conroe 3.0GHz LGA 775 - $330

CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800- $120

SAMSUNG SpinPoint T Series HD501LJ 500GB 7200 RPM SATA 3.0Gb/s Hard Drive - $120

Intellimouse Explorer 3.0 - $32

2x NEC Optiarc 18X DVD±R DVD Burner with 12X DVD-RAM Write Black SATA - $62

Creative X-Fi Platinum Fatal1ty Champion Series Sound Card - $165

Total: $1639

Thats the list of parts, although I will buy some off of Zipzoomfly and mwave for a little bit cheaper...The total comes to right around $1800+tax, shipping, etc. (even less after MIR!) I already have a monitor and keyboard, so no need to worry about that.

How does it look? Could I get any more bang for my buck? Anything better coming out soon in the same price range? Help me out here!

Thanks a lot guys, you rock.
 
- What are you planning to do with this new PC?
- What size is your monitor?
- Are you planning to overclock?
 
Planning on gaming and ripping music and movies

I have a 19 in Samsung 997mb; im VERY happy with it.

And yes, i would like to overclock a bit (probably not immediately), im hopeful as far as OCing goes since ive seen this processor pushed to 4 ghz
 
First off, I would get a different case, rather than the P180, as it isn't quite big enough for the 8800GTX. It will end up going into the hard drive bays, which of course will be impossible if you are using all of them up.

I would not recommend an 8800GTX for this size display. I think that you could go down as low as an 8800GTS 320MB. An 8800GTS 640MB will provide you with extra memory, but at the minute it is very unclear as to whether 320MB of graphics memory is enough anymore. So I would go for an 8800GTS 640MB. But, if you are planning to get a bigger monitor at some point in the future, it is a fairly good idea to get a GTX.

I wouldn't really buy a Raptor myself, as I don't think the speed gains are worth the humongous price tag. I would go for a drive with perpendicular recording. They are nearly as fast as the Western Digital Drives, but they don't carry the stupid price tag.

PSU, I would go for the Corsair HX620. Best supply around for this kind of setup.

CPU, I would get the E6750, it is much better value than the 6850. In fact, it is probably the best value processor of all of the Core 2 Duo range, and overclocked speeds will probably be quite similar.
 
I agree with lamboman.

SLI is only needed for high resolution 3D gaming. So, if you plan on getting a 1920x1080 LCD or higher, and want to game on it, then keep SLI as an option. Otherwise, theres no need for it. A single GTX is still fine for a 1920x1080 (or 1920x1200) LCD screen, and more cost effective than an 8800GTS SLI setup. Though, since you have a 19" CRT, a single GTS should suffice. SLI as an upgrade path isn't worth it unless, again, a large LCD is in the future plans. There should always be a better single card solution, and you could sell your old card to help offset the cost.

With that said, if you're not planning on a large LCD screen any time in the future for this system, then go with a P35 board. The Asus P5K series, Abit IP35 series and Gigabyte GA-P35(C)-DS3R are nice.

If you're OC'ing, pickup a Scythe Ninja Plus Rev.B, Tuniq Tower, or Thermalright Ultra 120 Extreme with Scythe S-Flex fan... along with some arctic silver 5.
 
Hmm, I did not take the size of the 8800 GTX into account....is there a case you guys recommend? I really like the style of the P180s, is there one similar to it, but larger?

The Corsair PSU: is it reliable? I havent payed much attention to PSU since I built my first computer a while back, so I'm out of the loop :>

With the 8800 GTX, at some point, I will need that kind of power to play on 1600x1200 or 1280x1024. I want to avoid upgrading for as long as possible, so I think I'll stick with the GTX ;)

Do you guys have any HD recommendations? Something around the same price or less...definitely not more

Any other suggestions?
 
Cases are personal preference. I'll let someone else give you suggestions on that.

The Corsair PSUs are actually supplied by Seasonic, one of the best PSU manufacturers out there. So, yes, they are very reliable. For more PSU insight, check out jonnyguru.com.

Yah, a single GTX is fine, but you still don't need the SLI board. A P35 board would be better. If, for some strange reason, you'd like to stick with the eVGA board and waste money, stay FAR away from that problematic TR revision.

Go with a Seagate Barracuda 7200.10 320GB. The speed gains with raptors don't justify their huge price premiums. My raptor does around 78MB/s, while my 'cuda does around 65MB/s, avg transfer rate. That isn't so bad considering the 'cuda is less than half the price and provides double the capacity. If you need more space, the Samsung 500GB drives are on par, as far as performance goes.
 
Yah, a single GTX is fine, but you still don't need the SLI board. A P35 board would be better. If, for some strange reason, you'd like to stick with the eVGA board and waste money, stay FAR away from that problematic TR revision.

So a P35 board is the same board minus SLI? Which mobo manufacturer would you recommend? I am going to stay far away from ASUS, I have RMAd my mobo 3 times so far, so they've had their chance.

Thanks!
 
So a P35 board is the same board minus SLI? Which mobo manufacturer would you recommend? I am going to stay far away from ASUS, I have RMAd my mobo 3 times so far, so they've had their chance.

The nForce 680i SLI chipset is only good for SLI setups, and is made by NVIDIA. The P35 Express chipset is for single card setups, and is made by Intel. They're two totally difference chipsets, catering to specific needs of end users. The P35's competitor from NVIDIA is the 650i Ultra chipset (which is, what you say, the same board minus the SLI). The P35 chipset is better for your needs, imo.

Check out the Gigabyte GA-P35-DS3R or GA-P35C-DS3R, and the Abit IP35 (-E/Pro/vanilla) series.
 
Hmm, I did not take the size of the 8800 GTX into account....is there a case you guys recommend? I really like the style of the P180s, is there one similar to it, but larger?

Actually you can fit in the 8800GTX inside the P180 as long as you don't use the upper drive cage. Just put all your hard drives into the lower hard drive bay, remove the upper drive cage and you fit in the GTX. So if you like the P180, now you don't need to go look for another case.

Here's a place where you can get the P182 for a decent price:
Antec P182 ATX Case - $125
 
Actually you can fit in the 8800GTX inside the P180 as long as you don't use the upper drive cage. Just put all your hard drives into the lower hard drive bay, remove the upper drive cage and you fit in the GTX. So if you like the P180, now you don't need to go look for another case.

Here's a place where you can get the P182 for a decent price:
Antec P182 ATX Case - $125

Thanks! I had no idea the P182 could be found so cheap!

Also, I updated the build...how does it look now? I would like to overclock the CPU, so how is the RAM for OCing?
 
Dunno how far the E6850 can overclock. Haven't seen any overclock on that CPUs yet.

But anyway, your RAM is fine for overclocking a C2D. You see, you do not need high performance or overclockable RAM with the C2D. Since the RAM you chose is guaranteed to run at 400Mhz, the E6850 has a multiplier of 9 and if you run the FSB to equal the RAM speed, you get 9 x 400 = 3.6Ghz.

Now that's just in theory. The last batch of E6600 CPUs were poor overclockers and it's down to luck of the draw. You might get an E6850 that'll do 3.2Ghz or one that does 3.7Ghz. And you might need an aftermarket HSF to get that high.
 
actually 3.8ghz has been reached on Air. on the E6850

Hitting into 4-4.2 ghz Watercooling is exoected.

Regardless 3.5ghz on e6850 is hit on stock vcore.

Great overclocker
 
actually 3.8ghz has been reached on Air. on the E6850

Hitting into 4-4.2 ghz Watercooling is exoected.

Regardless 3.5ghz on e6850 is hit on stock vcore.

Great overclocker

Can you please show me where someone has reached 3.8Ghz on air with the E6850? Not to cast doubt on you or anything but I'm curious as to what kind of setup the guy has if he can hit 3.8Ghz on air with the E6850. If that overclock is with the stock heatsink, then DAMN!
 
Back
Top