ChwyNiblet
Limp Gawd
- Joined
- Jan 15, 2011
- Messages
- 436
I just wrote this at OCN but I'm strapped for answers and wonder if anyone here could help me out.
So I'll try to be as clear as I can with this, but I'm beyond the point of frustration. ::deep breaths::
Today I bought a Corsair H60 cooler to replace my CM 212+. Opened up the case, took out the rear fan and the front fan that came stock with my CM Storm Scout case. Took out the 212+ and installed the H60. Things went without a hitch. Went to start up the computer and I was greeted with no video coming out and the computer rebooting every 3-5 seconds.
Heres what I'm working with:
Gigabyte P55-UD3R Rev. 1
Core i5 750
GeForce GTX570
Now I should preface this with this bit of unclear information. Before I installed the H60, I started my computer, walked away for a little bit then when I came back glanced at the screen and saw I message saying something to the effect of "The computer can not be turned on because the overclock was deemed unstable" or something to the effect of that. I just quickly disregarded it and shut the computer down to do surgery.
So the confusing thing is the motherboard doesn't seem to know whats wrong with itself. Sometimes I get very fast continuous beeps (power issue) and sometimes I don't get any beeps and it just reboots. Sometimes when it reboots the fans on the cooler and GPU go to full blast and sometimes they don't. Its rather confusing.
The first thing I did was swap out the PSU. That didn't help, same exact issues. Then I tried switching out the GPU, that didn't work either. I tried booting with only one DIMM in the first DIMM slot, that did not work either. Unplugged every unnecessary connector on the motherboard (front audio, USB ports, etc..) that didn't do anything. I reset the CMOS both by jumping the CLR_CMOS pins and taking the battery out for 2 minutes. I didn't remove the CPU from the socket so I doubt it was damaged when I replaced the coolers, I just rubbed it down with rubbing alcohol to get the old thermal compound off. I don't think the motherboard is shorting on itself but I haven't taken it out of the cast yet because what would it be shorting on? I just replaced the cooler and it was fine before I switched them out. Tomorrow I'm going to throw it on a test bench and stick the stock CPU cooler on the thing to see if that works.
Do you guys have any ideas? I'm kind of stumped here. Any help would be appreciated. Thanks!
So I'll try to be as clear as I can with this, but I'm beyond the point of frustration. ::deep breaths::
Today I bought a Corsair H60 cooler to replace my CM 212+. Opened up the case, took out the rear fan and the front fan that came stock with my CM Storm Scout case. Took out the 212+ and installed the H60. Things went without a hitch. Went to start up the computer and I was greeted with no video coming out and the computer rebooting every 3-5 seconds.
Heres what I'm working with:
Gigabyte P55-UD3R Rev. 1
Core i5 750
GeForce GTX570
Now I should preface this with this bit of unclear information. Before I installed the H60, I started my computer, walked away for a little bit then when I came back glanced at the screen and saw I message saying something to the effect of "The computer can not be turned on because the overclock was deemed unstable" or something to the effect of that. I just quickly disregarded it and shut the computer down to do surgery.
So the confusing thing is the motherboard doesn't seem to know whats wrong with itself. Sometimes I get very fast continuous beeps (power issue) and sometimes I don't get any beeps and it just reboots. Sometimes when it reboots the fans on the cooler and GPU go to full blast and sometimes they don't. Its rather confusing.
The first thing I did was swap out the PSU. That didn't help, same exact issues. Then I tried switching out the GPU, that didn't work either. I tried booting with only one DIMM in the first DIMM slot, that did not work either. Unplugged every unnecessary connector on the motherboard (front audio, USB ports, etc..) that didn't do anything. I reset the CMOS both by jumping the CLR_CMOS pins and taking the battery out for 2 minutes. I didn't remove the CPU from the socket so I doubt it was damaged when I replaced the coolers, I just rubbed it down with rubbing alcohol to get the old thermal compound off. I don't think the motherboard is shorting on itself but I haven't taken it out of the cast yet because what would it be shorting on? I just replaced the cooler and it was fine before I switched them out. Tomorrow I'm going to throw it on a test bench and stick the stock CPU cooler on the thing to see if that works.
Do you guys have any ideas? I'm kind of stumped here. Any help would be appreciated. Thanks!