Help with 5750 Card And Catalyst Drivers

[Marcdaddy]

Well i replaced my 4830 card in my Htpc with a 5750 Powercolor card. The card itself works great except for 2 things and it looks like the Catalyst control center is the guilty party. First im Running Vista 32 bit Ultimate with all updated deivers and here my problem.
1st The Image scaling is gone in the CCC so when i select 1920X1080 rez i got nice Black Bars all the way around my image No scaling
2nd problem is it will not let me run at 60 Hz on any Hdtv using Hdmi its forcing it to 30i, If i Force the 60Hz it then will drop my sceen rez.
Im currently running this setup to a Panasonic AEU2000
Keep in mind i had no problems with my old 4830 crad and older Drivers.

 

[elpibe10]

Both settings are there but they are well hidden.

I'm not in front of my HTPC now but they're actually in the screen with a big display and a small one on the bottom left. Right click on the downward facing triangle (@ the small display) and choose 'Configure'.

Took me quite a while to find them myself.

 

[Marcdaddy]

Ya its not showing up, let me check again, What about the Refresh rate forcing me to stay at 30i any ideas about that. Gonna go fire up the HTPC.

 

[Marcdaddy]

OK its Working Thanks, Now i gotta get the Audio working correctly in Powerdvd 9 ultra, which is upto daye, When i select send audio undecoded to my reciever all i get is audio clipping, and my Sony reciever supports True HD audio as well as 7.1 master.

 

[elpibe10]

OK its Working Thanks, Now i gotta get the Audio working correctly in Powerdvd 9 ultra, which is upto daye, When i select send audio undecoded to my reciever all i get is audio clipping, and my Sony reciever supports True HD audio as well as 7.1 master.

You'll need to select this :

More info. here :

http://www.anandtech.com/video/showdoc.aspx?i=3643&p=10

 

[Marcdaddy]

Ya i found out that the Drivers to support the Bitstreaming arent Officially released yet.