Had to take all the components out of a case today, when i put them all back in the pc wont start. There wasnt any sign of power led's or anything.
Jump started the psu with nothing connected and it powered up. Next step in debug was just connecting the main cable to the mobo, psu and cpu powered up with cpu fan at 100%. When I connected the aux cpu 4-pin connecter nothing happened!
Then I connected the gpu and hdd without the cpu 4pin connector, system powered up into same state, 100% fan load but wont post.
whats going on?
nothing happens when the cpu 4pin connector is attached
And I just started farcry2, mad to play it!!!!
Jump started the psu with nothing connected and it powered up. Next step in debug was just connecting the main cable to the mobo, psu and cpu powered up with cpu fan at 100%. When I connected the aux cpu 4-pin connecter nothing happened!
Then I connected the gpu and hdd without the cpu 4pin connector, system powered up into same state, 100% fan load but wont post.
whats going on?
nothing happens when the cpu 4pin connector is attached
And I just started farcry2, mad to play it!!!!