Help on Overclock?

plasmah77

n00b
Joined
Mar 11, 2008
Messages
2
Hi I have a Q6600@3ghz on a Gigabyte P35-Ds3l my cpu is maxed@3ghz I can't push past that. I checked and my system will boot at 400mhz FSB so its not a FSB wall. The cpu will boot into Windows Vista@3.4ghz but as soon as I run Prime one of the cores fail very quickly. I tried many combination's of settings to get stable above 3ghz but no deal.

I was wondering if it could be voltage drop? Here's why I say that:

Bios: 1.332v
Idle: 1.328
Load: 1.280

And yes I did push the voltage as far as 1.5v and still no deal.

My system specs:
Gigabyte P35-Ds3l Rev.2.0 / 2x1gig Crucial Ballistx Tracer 1066 / EVGA GTX 260 SC / Creative Labs X-Fi Titanium / Corsair Tx 850 PS / Apogee GTZ Ultima kit

Thanks in advance
 
If it was a Vdroop issue, setting the voltage to 1.5V in the BIOS would have gotten around that. Have you tried tweaking your NB voltage? Also, what are you running your RAM at? You should set it to its lowest possible frequency while you test out CPU overclocks.
 
Back
Top