Help! New rig is terribly unstable.

stoney_titan

[H]ard|Gawd
Joined
Feb 19, 2007
Messages
2,018
Well i finally built a new and first rig and i have a mess of a problem on my hands. It's simply terribly unstable. I will get into vista 32-bit (sometimes after multiple boots) and start to configure then complete blackout, fallowed by a single beep and a reboot. Vista also runs smooth as butter until it happens. Here are the specs:

E4300
DS3 1.3
Xclio 500w Goodpower
Gskill 2gb pc6400
centurion 5
160gb seagate hd
8800gts 320mb

Things i've tried (All noob troubleshooting of course):

1. Removing motherboard battery for 5min and replacing.
2. Re-seating video card and other cables.
3. Using only one stick of the 2, then switching. Same results.
4. Different drivers, and so on.
5. Upping voltage on RAM from 1.8 to 2.0.

The problem doesn't stem from putting load on the system either. It's completely spuratic. :mad:
I would do memtest, occt and other benches but it'll crash just opening them occasionally so their not going to do much good now would they.

Temperature is also ok. My e4300 doesn't even load past 50C during the 10-15 mins the os stays going during occt. HELP!!!! Please!!! Fast!!!!

P.S. As i was sitting here typing on laptop my rig crashed just sitting on the desktop.... No programs running at all!!! Fuck!
 
I'll assume you're not overclocking because you didn't mention it. My first guess would have been the power supply unit, but you have a pretty good one. There's a chance it is faulty however, that's the case with most hardware. Do you have a spare one you can try in the system?
 
Yes, However it's a cheapo cooler master 430W ps. Go for it? It also crashes out of bios. And it's currently restarting itself for the fifth or sixth time consecutively. :rolleyes: I hate this!

Also no overclocking yet. But i will be soon if i can ever manage to fix this.
 
Yes, However it's a cheapo cooler master 430W ps. Go for it? It also crashes out of bios. And it's currently restarting itself for the fifth or sixth time consecutively. :rolleyes: I hate this!

Also no overclocking yet. But i will be soon if i can ever manage to fix this.

Go for it unless your video card is a 8800. If it is, just take the x800 out of your old rig and boot up with that. Crashing out of bios is definitely hardware. My guess would be either memory, psu, or motherboard... in that order. Most likely it won't be more than one thing.
 
Go for it unless your video card is a 8800. If it is, just take the x800 out of your old rig and boot up with that. Crashing out of bios is definitely hardware. My guess would be either memory, psu, or motherboard... in that order. Most likely it won't be more than one thing.

Yea its a 8800gts. Whats a good program to clear the 8800 gts drivers?

Or could i simply use onboard to avoid it?
 
I bought one of those xclio power supplies and after 4 days my comp started to crash and then finally wouldnt even boot. I bought the corsair 520 and it just rocks. I wont go cheap again..
 
Yea its a 8800gts. Whats a good program to clear the 8800 gts drivers?

Or could i simply use onboard to avoid it?

The DS3 does not have onboard video. Thats not a VGA slot you're looking at, it's a serial port.

And to clear out drivers, just google and download "Driver cleaner"

So basically just hook up that coolmax PSU to your system and if the system doesn't crash at all, then you have a PSU problem.

If your system still crashes, then it's either the RAM or mobo. Since you said the system crashes even in bios, I think it may be a dying mobo. Then you should RMA that sucker to either Newegg or gigabyte.
 
The DS3 does not have onboard video. Thats not a VGA slot you're looking at, it's a serial port.

And to clear out drivers, just google and download "Driver cleaner"

So basically just hook up that coolmax PSU to your system and if the system doesn't crash at all, then you have a PSU problem.

If your system still crashes, then it's either the RAM or mobo. Since you said the system crashes even in bios, I think it may be a dying mobo. Then you should RMA that sucker to either Newegg or gigabyte.

DS3 with G965 has Onboard, P965s Don't

My G.Skill wasn't tooo unstable, but I also upped the ram from 1.8 to 2 just in case it wouldn't be stable.

Definitely reformat if you haven't already.
 
Well I'm typing now on my dinasour emachine with the xclio 500W powering it. I have no idea what to RMA. I'm thinking it's a bad mobo myself. What do you guys think? The whole using my old psu and x800 isn't going to work because now i can't even get past the Ds3 logo before it reboots. :mad: I'm going to put some heavy load on the xclio using a few benchies and see how stable it is. I'm sick to my stomach. :(

P.S. Any idea's would be much appreciated.
 
You can't really bench to load a PSU... not without a fairly good system, anyway. Max draw is max draw. Still, use it for a while and see if you have any problems, if you don't call up Gigabyte or Newegg and RMA your board. Newegg is probably easier with new parts.

As for the sick to your stomach bit, nor worries man. You lost a few days, a week or so tops. Everything will get sorted, Newegg will treat you right. It's part of why people order from there.
 
Yeah thought i'd try it anyways. I have had occt and ati tray tool going for 35mins. now with no hiccups. Me thinks this system at load would do the same or more than the new rig listed above in bios....:confused: I'm thinking the mobo's got to go. Will swapping a new mobo be too difficult? Being that it's the same brand and model will it take well?
 
Should be fine. Call them up tomorrow, explain it's defective, crashes in BIOS despite setting memory timing/voltages, etc, will be stable then reboot, you tested the PSU with another machine and no problems, etc. They will tell you where to send it and get you a new one.
 
Could be the ram if you ask me. I'd try running with one stick and then the other before i RMA the motherboard.
 
Well I'm typing now on my dinasour emachine with the xclio 500W powering it. I have no idea what to RMA. I'm thinking it's a bad mobo myself. What do you guys think? The whole using my old psu and x800 isn't going to work because now i can't even get past the Ds3 logo before it reboots. :mad: I'm going to put some heavy load on the xclio using a few benchies and see how stable it is. I'm sick to my stomach. :(

P.S. Any idea's would be much appreciated.

have you actually TRIED using the coolermaster PSU in the new rig? or have you just used the xclio in something else? my Raidmax ( :rolleyes: ) PSU doesn't work at all in my current rig ( the one it came with ) so i replaced it... it works fine in my old one :p
 
have you actually TRIED using the coolermaster PSU in the new rig? or have you just used the xclio in something else? my Raidmax ( :rolleyes: ) PSU doesn't work at all in my current rig ( the one it came with ) so i replaced it... it works fine in my old one :p

Damn you! Now i don't know what what to do. :p Also i already tried the one stick of RAM at a time and it's still a no go.... Any other suggestions? I might pop the 8800 in the dinasour and try some more stability tests before i call newegg. Seems like the mobo is tanked.

Update: The 8800 is now running in my M-ATX paired with a Amd 64 3200+. :) The xclio is also in and there hasn't been a studder. Me still thinks it's the DS3. Any other troubleshooting i could do?
 
Easiest thing to start with, try using the other PCIe power connector (your PSU should have 2) on the video card - any change? Your PSU has 3 "rails" configured so it's possible by switching PCIe power connectors you'll jump onto a different rail that may be less heavily loaded than the one you are having problems with now?

If you try the 430 watt Coolermaster PSU in your new rig, does the situation change at all? What of you throw your old video card in the new rig with the Xcilo PSU - stable?

I've recently replaced an older Enermax PSU in a system that was having problems similar to what you are describing when I ran 3D applications in XP. It turned out my older Enermax 24-pin PSU with 2 x 12v rails actually had the OCP "limiters" enabled on each 12 rail and when I played Oblivion, the x1900 GT wanted more juice than the PSU could give since it was sharing 17a with all of other 12v devices in the system other than the CPU. Upgrading to an Antec TruePower Trio 650 watt PSU that features 3 x 12v rails without any sort of limiters solved the problem for me anyway.

Comp-USA has good out the door sale prices on the Antec EarthWatts 500 and TruePower Trio 550/650 units right now if you needed to go pick something up in a pinch to test with.
 
Comp-USA has good out the door sale prices on the Antec EarthWatts 500 and TruePower Trio 550/650 units right now if you needed to go pick something up in a pinch to test with.

Those are fine for testers but I would not keep them. Antec PSUs are flaky at best, lately, and multi-rail designs really are overrated. You run in to overdraw problems like the one described above that just would not happen on a single rail PSU.
 
Easiest thing to start with, try using the other PCIe power connector (your PSU should have 2) on the video card - any change? Your PSU has 3 "rails" configured so it's possible by switching PCIe power connectors you'll jump onto a different rail that may be less heavily loaded than the one you are having problems with now?

Only have one. :( (and the adapter doesnt change a thing)

If you try the 430 watt Coolermaster PSU in your new rig, does the situation change at all? What of you throw your old video card in the new rig with the Xcilo PSU - stable?

Exact same thing happened.
 
Hmm.

Did you try the older video card in your new rig?

Is the northbridge heatsink getting nice and toasty warm? If not I wonder if there's a problem with the thermal interface between the chip and heatsink causing it to overheat - which I'd RMA for anyway just in case damage has been done.
 
Those are fine for testers but I would not keep them. Antec PSUs are flaky at best, lately, and multi-rail designs really are overrated. You run in to overdraw problems like the one described above that just would not happen on a single rail PSU.

Actually if you take a peek over at www.jonnyguru.com you'll find that he noted there really aren't separate rails on either the EarthWatts 500 watt or TruePower Trio 650w units he reviewed. They are both actually single 12v rail PSU's simply advertised as having more than one. I would agree that multi-rail designs are overrated so this isn't a bad thing.

As for Antec being "flaky at best" - please provide your data. Both of the units I suggested are designed and manufactured by Seasonic and while I certainly wouldn't put these up against a real Seasonic/Corsair/PCP&C unit (for 2-4 x the price)I would hardly call them "flaky". The Earthwatts 500 scored a 9 out of possible 10 in Jonny's review... and is an absolute STEAL at $60 out the door (and on the web) at CompUSA.

... pardon the departure from the topic at hand, just found the Antec bashing misplaced and felt a response was in order.
 
Actually if you take a peek over at www.jonnyguru.com you'll find that he noted there really aren't separate rails on either the EarthWatts 500 watt or TruePower Trio 650w units he reviewed. They are both actually single 12v rail PSU's simply advertised as having more than one. I would agree that multi-rail designs are overrated so this isn't a bad thing.

As for Antec being "flaky at best" - please provide your data. Both of the units I suggested are designed and manufactured by Seasonic and while I certainly wouldn't put these up against a real Seasonic/Corsair/PCP&C unit (for 2-4 x the price)I would hardly call them "flaky". The Earthwatts 500 scored a 9 out of possible 10 in Jonny's review... and is an absolute STEAL at $60 out the door (and on the web) at CompUSA.

... pardon the departure from the topic at hand, just found the Antec bashing misplaced and felt a response was in order.

My experience is mostly with older TruPowers, 450 watts, 500 watts, 550 watts, in my old machine and in those of friends (I recommended these things and when they crapped out people came knocking -- and sure they got RMAd and replaced, didn't take anything with them, but it was still a pain). So needless to say I'm leery of Antec PSUs now. I've also been hearing that the Earthwatts (though maybe it's a problem confined to lower-rated models) fail early due to poor fan selection and overheating caps.

While maybe not my most informed comment around here, there was some reasoning behind it.
 
Back
Top