Help me with new hard drives please

rhufnagel

n00b
Joined
Apr 30, 2006
Messages
17
Hello,

I just upgraded my system to this:

evga 780 sli mobo
Q9450 quad core intel
4 gigs corsaur ram running at 1066 MHz
2 x 8800 GT 512 Mb in SLI

My current HD is a few years old seagate 320 gb drive (sata) Its almost full, and running very slow. Since I wanted to upgrade my OS to the 64 bit version of Vista home premium, I figure Ill re-do my HD/s at the same time since I have to do a clean install, Im decent with building my PC's but not on the level of some of you, and was hoping you could help me decide.

I am primarily a hardcore gamer, actually most of my recent upgrades are for Age of Conan which i hope is worth it...

OK, questions:

1. Do you recommend going with another single drive solution, or multiple drives?

2. If multiple, does a 10k raptor drive as the system drive, with say a 500gb 7,200 drive for my games, music sound like a good choice for performance? Which drives are best these days?

3. If that set up is a good one, can you tell me in "im an idiot" steps on the best way to do it? I recall having issues with drives not being detected by the bios, having to install drivers with F6 or something like that, etc. I do NOT have a floppy drive on here so do i need to copy the mobo floppy to a thumb drive or a cd/dvd? Can I install both drives at same time, then partion it all, then add the OS?

4. What partion size do you recommend, or do I leave the 2 drives as C and D and leave it at that?

I would really appreciate some guidance.
 
1. Multiple drives
2. 640gb WD boot drive, 750gb storage drive (750's are much cheaper per GB)
3. No raid setup, so Vista should recognize everything just fine
4. first partition on the 640 is for the install+programs/games (depending on how many programs you have, 60+ GBs), rest for extra storage and 1 partition on the 750

depending on your storage needs, you might be fine with the WD 640GB and your old 320GB for a while
 
so there is no performance benefit from using a raptor 10k drive as the system drive?
 
There is, Raptors are good for system drive because of its fast seek. They are pricey however.
 
The raptors are a little dated now, from what I've read, and you are going to be better off with the 640gb wd drive for your system drive. However, the new extremely expensive WD 10k Velociraptor drive would be an awesome system drive. Stripe two of them, and for $600, you have awesome load times. :-p
 
3. No raid setup, so Vista should recognize everything just fine

With his new motherboard (which I also have), Vista shouldn't have any problem at all recognizing a RAID setup. Being a hardcore gamer, he's going to want some speedy load times, and striping a couple drives is a quick and inexpensive way to boost that a little. Vista (at least on my one computer I've tried it) doesn't have a problem with recognizing RAID 0
 
ok, so there is something newer than the raptor called velociraptor? how big are they?
 
Velociraptors are 320gb. They are also 2.5inch drives put in a big 3.5 heatsink, so it fits in a regular case. For the price they are at the moment, I doubt the increase in performance will be noticably worth it, but I haven't tried them. They are brand new though, so within a couple months prices will drop considerably
 
2. If multiple, does a 10k raptor drive as the system drive, with say a 500gb 7,200 drive for my games, music sound like a good choice for performance? Which drives are best these days?


You will also want to put your games, and other programs on your system drive. The bigger slower drive will be for your mp3/video/other storage.
 
ok, just curious, I tried to find the new drives and they dont seem to be available, does anyone know where to actually buy a velociraptor drive?

If I cant get them, does a raid setup for performance require matched hard drives? If they need to be exactly the same, and I cant get the new velociraptors, which drives do you suggest? Again, I am looking for peak performance.
 
Try Google's Froogle.com. I have seen a few vendors that are selling them. I still haven't seen any big ones like fry's or newegg selling them yet.

For a raid 0 setup, the drives don't have to be identical, nor do they have to be the same size, but you are only going to be able to get a final drive size of double your smallest drive, so it's practical just to buy two of the same drives.

If the velociraptors are too expensive, The 640gb WD drives seem to be the ones to go with. Fairly cheap, and pretty quick.
 
damn over 300...expensive stuff....is there anything else I could go with for solid performance using 2 drives? Thats a bit expensive.
 
Hehe, oh, good point Old Hippie. I didn't look at availability. :-p

Yeah, stripe two 640gb WDs together. You should be able to get both of those for under $200 if you look. Then you can still use your old drive for storage too. Take note that the only performance gain you'll ever notice with RAID 0 is in loading times. ie. first starting up programs or games, going through loading screens quicker, loading big files.
 
might try looking into getting an SSD drive for system/boot, of you have the money for it, they are supposed to be pretty fast!
 
what is an SSD drive?

Also, I was under the impression i would put the system drive on its own, then games/ apps on a diff drive? Should I put games and stuff in C drive? Or if I do 2 x 640 mb drives, and make it raid 0 for performance, do I put windows on C, games on D, music on E, etc?

Does it pay to make a partion for the page file?
 
You want your programs/games on your fastest drive. It's up to you how you partition that drive. If you want your OS on a partition and games on another partition on the same drive that's fine, but the point of getting the more expensive faster drives and striping them is to see performance. The slower cheaper drives are for storage. You aren't really going to notice any difference loading your mp3s and videos on a fast drive.

When you partition a drive it will be separated into your C:, D:, E:, F:.... however many partitions. The letters don't necessarily mean separate drives.

SSD is a solid state drive. It's a drive made from memory, and it's way out of your price range :) He was really just pulling your chain I think :) But yeah, that would be awesome to have. :)
 
ok so if im going to stripe 2 x 640 mb drives (performance right) help me put together a step by step.

1. Remove old drive, install both new drives
2. Do i just auto detect, or do I have to go into bios now to set up the raid stripe?
3. When/ how do I create the partitions, and does anyone reccomend a seperate partion for the page file?
4. installing the OS, I have no floppy drive, do I need any special drivers on the evga 780i sli mobo?
 
I just got back from vacation, so I will toss my 2 cents in here.

If you are going to do a striped array, then you may want to price out doing that with a couple of the older 150 gig Raptors. You get the great seek times, and striping them reduces their greatest weakness which is transfer rates. Also some people complain they are noisy. I have a 36 gig Raptor that is several years old that I have no complaints about other than it is slow. I never had a 150 gig.

If you are going to do a striped set, just remember to not keep or back up important data on it. If either of the drives fail, you loose all the data on the array.

Raid arrays do add an extra level of complexity to the drive system. If you are willing to live with a few minuses, it is a good way to get a modest performance increase.

Don
 
Your motherboard manual will have instructions on how to setup RAID 0 (Striping) on your harddrives. Generally:

1. Take out old drives
2. Install new ones.
3. Go into your bios and turn on RAID 0
4. When your computer restarts there should be a button during startup you can push (it will display which button on screen) to get into the raid setup utility.
5. Pick the two drives you want to stripe.
6. Install Vista.
7. Vista automatically detected the RAID array for me, and my board was either the same as yours or one step older.
8. If it didn't auto-detect the array, I think that the CD that came with your board has the drivers on them, and I don't think a floppy is required.
9. Somewhere in the beginning of the installation it will ask you what drive and partition to install on. Here's where you can create whatever partitions you want. I do not know anything about a separate partition for the page file. Partitions don't seem to be nearly as important to a windows OS as they are for a Linux OS, so I imagine it doesn't matter too much, but don't take my word for it.
10. Go through the rest of the installation steps, and install your mobo drivers, video card drivers, and use Windows/Microsoft Update.
 
well due to some $$ constraints, I went with 2 x 500 gb Seagate ST3500641AS. There 16mb, 3 g/ps xfer, and have that NCQ. As soon as the 64 bit vista shows up Ill try to do this, ty for all the help. Hopefully next post will be Im back up and running, and NOT about me needing more help...lol
 
well due to some $$ constraints, I went with 2 x 500 gb Seagate ST3500641AS. There 16mb, 3 g/ps xfer, and have that NCQ. As soon as the 64 bit vista shows up Ill try to do this, ty for all the help. Hopefully next post will be Im back up and running, and NOT about me needing more help...lol

The reason why the 640GB drives were being recommended is because they have 320GB per-platter, which is the best density available right now. That's why the 640GB drives have more speed than the 750GBs (which are 3x250, I believe). By going to your 500GB drives (probably 2x250GB) you are losing out on some performance. Just so you know.

The "3Gb/s" transfer is actually the limit of SATA II connectors, and has absolutely nothing to do with how fast the drive will actually go. Okay, well, almost nothing if anything at all.

Best of luck getting your stripe set up.
 
Yes, so if you can, you should definitely spend $50 more to get the 640 gig drives. It's well worth it, and hard drives last a long time, so they will be with you longer than the rest of your hardware. But it sounds like you already got the drives. Good luck with those! And I'll be glad to help if you have any problems with your RAID setup.
 
Check Newegg... THink they might still have the WD 320 GB SE drives on sale. I would put two of these drives in a RAID 0 configuration and have a backup drive for any imporant files you want to backup... The drives were on sale for around 80 bucks each a little while ago
-Massacre
 
Back
Top