Alright here's the deal(story)
I have an Asus A8N-SLI Mobo, an EVGA GeForce 7900GT Video card, 2 Corsair XMS3200 1GB memory sticks and an Enermax ELT500AWT PSU.
Awhile back probably about 4 or 5 months ago the video card started to act up, displaying lots of dead pixles on multiple monitors. I put in a regular PCI video card and sent in the other one. Gets back everything works fine. Now about 3 weeks ago I sent in the memory due to memory errors with one module. I got them back and I put them in, started a format.
While installing windows I noticed some very odd characters and blocks. I boot after windows install was complete and now the pixles are back. There are randomly dead pixles on the monitor, during POST, boot and in windows.
I put in another video card again, works fine. So I took everything out of the case, I set it up to run on my desk. I start it up and I notice that the chipset fan is making lots of noise. I unplugged the 6 pin power source from the video card and booted again. Now the chipset fan is not making any noise... I go into the BIOS and notice that the chipset fan says it's running at 6k RPM. I hook the 6pin back up and it starts to grind again. Into bios I see the chipset fan is only running at 2400 RPM...
After trying this a few times the chipset fan has stopped grinding. There is some dust but not much on any of the devices, I really can't figure out what it is. If anyone could give me some ideas that would be great. I don't have another PSU to try as this mobo needs the 24 pin and no other mobo to try the video card in right now so please consider that.
If you need anymore information please just ask.
I have an Asus A8N-SLI Mobo, an EVGA GeForce 7900GT Video card, 2 Corsair XMS3200 1GB memory sticks and an Enermax ELT500AWT PSU.
Awhile back probably about 4 or 5 months ago the video card started to act up, displaying lots of dead pixles on multiple monitors. I put in a regular PCI video card and sent in the other one. Gets back everything works fine. Now about 3 weeks ago I sent in the memory due to memory errors with one module. I got them back and I put them in, started a format.
While installing windows I noticed some very odd characters and blocks. I boot after windows install was complete and now the pixles are back. There are randomly dead pixles on the monitor, during POST, boot and in windows.
I put in another video card again, works fine. So I took everything out of the case, I set it up to run on my desk. I start it up and I notice that the chipset fan is making lots of noise. I unplugged the 6 pin power source from the video card and booted again. Now the chipset fan is not making any noise... I go into the BIOS and notice that the chipset fan says it's running at 6k RPM. I hook the 6pin back up and it starts to grind again. Into bios I see the chipset fan is only running at 2400 RPM...
After trying this a few times the chipset fan has stopped grinding. There is some dust but not much on any of the devices, I really can't figure out what it is. If anyone could give me some ideas that would be great. I don't have another PSU to try as this mobo needs the 24 pin and no other mobo to try the video card in right now so please consider that.
If you need anymore information please just ask.