help it doesn't work

hstuehmeyer2000

[H]ard|Gawd
Joined
Apr 2, 2006
Messages
1,739
yesterday i got my dfi expert from the egg, so i hook it all up and it starts up good and everything so i load setup defaults and restart, but then it doesn't go past the 3rd debug led. so i clear the cmos and it works again and then it does the same thing when i restart. so i flash the bios with the tmod cd and i restarts after it is finished flashing it and works so then i restart the board again and now it won't go past the 4th led.

so no i go get my 9npa and hook every thing up to that and now i cant get to the bios on that to. so i switch vid cards and ram and still nothing works. the only things i cant switch are psu, and cpu. the psu obviously works because both of my boards turn on fine they just dont post and i cant see any thing. so i think the cpu might be bad, what do you guys think?
 
Have you checked you cpu for bent pins? Unless you fubared something while moving it over to your new board, I would be alot more suspicious of your ram, and yes, I see you tried different ram, but are you 100% sure it's ok... Failure to post is many times the result of fuked ram, and I personally feel that spontanious cpu failures are very, very rare. I just haven't seen it happen often enough to think that could be the problem, unless, like I said, you physically, or statically screwed it up while moving it over.
 
Back
Top