hstuehmeyer2000
[H]ard|Gawd
- Joined
- Apr 2, 2006
- Messages
- 1,739
yesterday i got my dfi expert from the egg, so i hook it all up and it starts up good and everything so i load setup defaults and restart, but then it doesn't go past the 3rd debug led. so i clear the cmos and it works again and then it does the same thing when i restart. so i flash the bios with the tmod cd and i restarts after it is finished flashing it and works so then i restart the board again and now it won't go past the 4th led.
so no i go get my 9npa and hook every thing up to that and now i cant get to the bios on that to. so i switch vid cards and ram and still nothing works. the only things i cant switch are psu, and cpu. the psu obviously works because both of my boards turn on fine they just dont post and i cant see any thing. so i think the cpu might be bad, what do you guys think?
so no i go get my 9npa and hook every thing up to that and now i cant get to the bios on that to. so i switch vid cards and ram and still nothing works. the only things i cant switch are psu, and cpu. the psu obviously works because both of my boards turn on fine they just dont post and i cant see any thing. so i think the cpu might be bad, what do you guys think?