HDMI/DVI switch and HDMI/DVI adapters

FMunkey

n00b
Joined
Aug 12, 2008
Messages
36
Ok, so i recently bought a samsung 2433bw and got 3 male DVI to female HDMI adapters from my school for free.

Because this monitor has only 2 inputs, DVI and VGA, I was wondering if i could buy an HDMI switch and put that through DVI with an adapter.

My computer would also take the change from DVI to HDMI, then through the switch and then back to DVI, and my cable box would go HDMI to switch to DVI. So i guess the main question is if the adapters are reversible? I think they are, but i'd rather ask before spending the money.

Thanks!
 
Yes they are reversible. I have used this config with no problems.

If your video card is a fairly recent model it should be fine with the HDMI switch. Sometimes there are issues, so the first thing is to ensure you use Port1 on the video card. With nVidia it's marked and usually the port closes to the motherboard, with ATI the port closest to the slot screw.
 
If you just need 2 HDMI inputs, I would suggest getting a passive pushbutton switch from Monoprice. They also have powered switches with more inputs and remote controls, but some of these can have issues with certain equipment. I had been using a passive switch until I got my new monitor that has both DVI and HDMI inputs.

BTW, you may have to set your cable box for 720p if it doesn't have 1080p output. I don't think the monitor will accept an interlaced signal. Also, that monitor may vertically stretch 16:9 material.
 
If you just need 2 HDMI inputs, I would suggest getting a passive pushbutton switch from Monoprice. They also have powered switches with more inputs and remote controls, but some of these can have issues with certain equipment. I had been using a passive switch until I got my new monitor that has both DVI and HDMI inputs.

BTW, you may have to set your cable box for 720p if it doesn't have 1080p output. I don't think the monitor will accept an interlaced signal. Also, that monitor may vertically stretch 16:9 material.

You're correct about the stretching, my xbox 360 streches just a tiny bit, an annoyance, but i can settle for some things. What is odd about it is that when i set the xbox to 1680x1050, it give me the correct aspect ratio.

I'm going to look in my cable box options now to see if I can check the hd options I want.

Also, How much is a good HDTV tuner card? That may be an alternative, and would allow me to rip shows to my harddrive. And since I have DVR, I can easily set that to record what i want and then transfer over to my computer.

The 2 port switch for 21 dollars shipped looks good, i may have to get that soon.
 
Yeah, the issue is that the monitor is 16:10 instead of 16:9, so it stretches to fill that. When you set it to 1680x1050, that's a 16:10 resolution so it isn't stretched.

I don't know how much good HDTV tuner cards go for, but it would be a good option. Then the computer will handle the scaling, and it won't be stretched.
 
Yeah, the issue is that the monitor is 16:10 instead of 16:9, so it stretches to fill that. When you set it to 1680x1050, that's a 16:10 resolution so it isn't stretched.

Now I realize what is going on with the 1680x1050 on my xbox. The xbox is putting the bars on it. It's creating a 16:9 image, but outputting a 16:10. I didn't mention that it had the bars when displaying in 1680x1050.
 
Back
Top