StillFunkyB
[H]ard|Gawd
- Joined
- Oct 6, 2007
- Messages
- 1,386
Completed the delidding this evening. I used a regular razor blade, bare, and was very careful and took my time. Started with one corner and then another corner, then when the corners were done I worked on the sides.
I was thinking of lapping before I took the IHS off, however putting the blade up to the IHS and it was pretty flat already. I was surprised at that because the two Core 2's I lapped were not flat at all prior to lapping.
Waiting for some CL Liquid Ultra to arrive from FrozenCPU.
Before delidding, 4.5 @ 1.25 (didn't try lower) was in the 80's with highest core reaching around 87-88.
Oh, and there is quite a bit of comedy in this thread.
I was thinking of lapping before I took the IHS off, however putting the blade up to the IHS and it was pretty flat already. I was surprised at that because the two Core 2's I lapped were not flat at all prior to lapping.
Waiting for some CL Liquid Ultra to arrive from FrozenCPU.
Before delidding, 4.5 @ 1.25 (didn't try lower) was in the 80's with highest core reaching around 87-88.
Oh, and there is quite a bit of comedy in this thread.