Hands On With The Oculus Rift

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
The crew at Legit Reviews got a little hands on time with the Oculus Rift today. The prototype may look funny but, according to the article, it works. Hit the link for the complete rundown.
 
...any game that uses the Unreal 4 game engine should be able to run on the Oculus Rift since John Carmack and team has already done the coding


Uhhhhh....
 
woulda been cooler in a similarly sized cereal box
 
This is your task if you accept it, take a picture that is exactly like this but with a full sized pc lcd monitor inches away from your face hanging off some contraption hanging off a backpack.
 
I'm pretty sure google is working on similar technology. And it will be better than this.
 
project I am working on (modded Sony 3d Personal viewer):
466115_3479031251005_475573654_o.jpg
 
To those complaining about the resolution of the LCD, the company gave a very good explanation:
In our use of the Oculus Rift we were impressed by the new immersion, but we did notice that the resolution was a bit low. We expressed this with Oculus and this is what the company had to say:

"Believe me, we want to deliver high resolution, and that is something we will deliver in the consumer version. For now, though, there are very practical limitations that resulted in the current resolution:

1) Currently, the HDMI standard does not support pushing dual 1080p at 60hz, only 24hz. Dual cables have a huge set of issues (Bulk, keeping the image in sync, impossible to drive from consoles), and Displayport does not have wide enough adoption to justify exclusivity to that standard.

2) Rendering a game in stereoscopic 3D means you are effectively rendering the game twice, once for each eye, dropping your FPS by as much as half. In addition, HMDs need a consistently high refresh rate, even occasional drops greatly reduce the quality of the experience. Hypothetically, if you wanted to push a game into dual 1080p HMD, you would need a computer capable of rendering the game in 2D and never dropping below 120fps. There are very few people out there with rigs that capable, and we need the developer kit to be accessible to all developers, not just the ones with $6,000 liquid nitrogen cooled screamers.

3) Higher resolution displays are very expensive right now. By next year, the prices will be reduced by an order of magnitude.

4) The lens design coupled with the software distortion means that the center of the image has much higher resolution in the center than in the periphery, much like the human eye. I know it is hard to believe this, but if you ask anyone who has used the display, they will tell you how effective it has been. It has been shown to hundred of people, ranging from average joe non-gamers to the rock stars of the game developing world, and the experience has been universally praised."​
In summary:
  • Small high resolution LCD screens isn't cheap enough... yet. We're getting closer and closer to 1080p LCDs on our smartphones, but not yet.
  • HDMI currently doesn't push 3D video at 60 Hz at 1080p, only 24 Hz.
  • And, switching to DisplayPort wouldn't be effective if there isn't a wide adoption of it yet. In other words, those outside the enthusiast gaming community and game consoles themselves.
 
Used to go at a place called Battletech that had 20 pods linked together with some mac pcs and
was like a Mechwarrior type of simulator .... that was immersive!
 
Used to go at a place called Battletech that had 20 pods linked together with some mac pcs and
was like a Mechwarrior type of simulator .... that was immersive!

Wow, you're old! I remember seeing that on TV when I was like a newborn or something!
 
Wow, you're old! I remember seeing that on TV when I was like a newborn or something!

They shut down the place after i went 2 times :/ sad panda
Put missile and laser on the front trigger! and then shut down reactor.
fun times fun times...
 
No it was successful but it was in a highrise in downtown and wasn't profitable i guess .... but was hella fun ... i still got my battletech badge somewhere ;P
 
1) Currently, the HDMI standard does not support pushing dual 1080p at 60hz, only 24hz. Dual cables have a huge set of issues (Bulk, keeping the image in sync, impossible to drive from consoles), and Displayport does not have wide enough adoption to justify exclusivity to that standard.

So what is wrong with the standard DL-DVI?

2) Rendering a game in stereoscopic 3D means you are effectively rendering the game twice, once for each eye, dropping your FPS by as much as half.
...cause no one has ever heard of playing any current games in 3D with a current gen PC.

3) Higher resolution displays are very expensive right now.

Whats the point? The low res model available via kickstart pre-order isn't quite cheap either.

4) The lens design coupled with the software distortion means that the center of the image has much higher resolution in the center than in the periphery, much like the human eye.

This implies the 640x480 screens they are using must also have more pixels in the center to go along with that software distortion?

If you can't tell, I'm not buying the arguments.
 
It looks very interesting, but how am I going to see the keyboard? I can see problems trying to play something like WoW with this. Being able to choose your power very quickly will be difficult!
 
It looks very interesting, but how am I going to see the keyboard? I can see problems trying to play something like WoW with this. Being able to choose your power very quickly will be difficult!

You know, on second thought, your argument makes 3D goggles all the more worth having: I absolutely hate these 'so technical have to use macros' MMO bullshit games, besides who would even care about using 3D for an MMO?
 
What do you need to see the keyboard for? Do people still look at their keyboards to type?
 
@BBA
No, they are displayed as is with the fisheye effect, the glass lenses in front of each eye then re-distorts them properly. In effect that big round bulge in the middle gets squeezed back into the proper shape, increasing the pixel density in the middle.
 
To add. This will indeed cause the pixels at the edges of the screen to stretch, but this is a clever way of taking pixels out of the non-essential peripherals and re-distributing them in the middle where it counts.
 
So what is wrong with the standard DL-DVI?
bulk was the concern with 2 HDMI, how does a DL-DVI cable reduce the bulk..?

...cause no one has ever heard of playing any current games in 3D with a current gen PC.
3d.. 27"-40" inches from a screen.. that isn't "surround" style.. there's a lot more to make 3d smooth, when you're closer to the image.
 
Good Grief, they could have 3D printed a more fuctional enclosure for a few hundred dollars ....
 
You know, on second thought, your argument makes 3D goggles all the more worth having: I absolutely hate these 'so technical have to use macros' MMO bullshit games, besides who would even care about using 3D for an MMO?

Who mentioned anything about macros? In a MMO I typically have 10 powers available at the push of a key and 20 or so powers available at the click of a mouse. The first is going to be difficult if I can't see the keyboard - I'm not a touch-typist. I suppose I could get out my Thrustmaster Cougar HOTAS...
 
This implies the 640x480 screens they are using must also have more pixels in the center to go along with that software distortion?
Not the screens, but the optics push more pixels toward the center.
 
Bulk is not a concern...they don't have to use the standard cable connectors at the glasses.

Oculus said:
"Believe me, we want to deliver high resolution, and that is something we will deliver in the consumer version. For now, though, there are very practical limitations that resulted in the current resolution:

1) Currently, the HDMI standard does not support pushing dual 1080p at 60hz, only 24hz. Dual cables have a huge set of issues (Bulk, keeping the image in sync, impossible to drive from consoles), and Displayport does not have wide enough adoption to justify exclusivity to that standard."

bulk was an issue.
 
That close up picture showing the lenses is what scares me. His eyes are clearly looking into the box, and into the lenses. They arent surrounding his eyes, they are in front of his eyes. I was expecting something that wraps around your face/temples completely. I dont want to feel like I'm looking through a couple of toilet paper tubes at the image in front of me. Now I'm a bit concerned.
 
That's the exact opposite to how it's been described. The standard 40 degree HMDs are the "toilet paper tubes". The Rift has more than three times the FOV compared to some other HMDs.
 
That close up picture showing the lenses is what scares me. His eyes are clearly looking into the box, and into the lenses. They arent surrounding his eyes, they are in front of his eyes. I was expecting something that wraps around your face/temples completely. I dont want to feel like I'm looking through a couple of toilet paper tubes at the image in front of me. Now I'm a bit concerned.

More like they're around his eyes. The lenses are concave. The actual displays are probably 2 inches by 2 inches for each of the eyes. Hence why they need concave lenses.

I'm also interested in how far the focal point is. Are the eyes still straining to focus at two inches? Or are the lenses enough to elevate the need for it or make the screen seem further?
 
It was a grammar snafu

elevate = increase stress
alleviate = decrease stress

:p
 
I know everyone is expressing skepticism but we haven't used it. Unless those that have tried it are bs'ing us it does indeed work well enough to impress.
 
Back
Top