Intro: I made a little trip to Micrcenter with my wife for some Patriot DDR3 and a few other things. And of course, we left with more than was on our checklist. One of which is the ever-so-popular Corsair H50.
Problem: I'm getting a weird humming/air turbulence noise at the radiator. This is eliminated when I slow the down below 1100 RPMs. I can also eliminate the noise with the fan at full speed by placing my finger tip on the intake or exhaust side of the unit. Seems to disrupt the turbulence.
Current setup: I have my H50 in the recommended intake configuration with the included fan. I am using a Zalman FanMate2 to control the fan speed off the CPUFAN header. Pump is plugged into the SYSFAN1 header.
Question: How do I go about retaining a moderately high RPMs/CFM without this odd noise? Do I need a spacer between the fan and the radiator? Add a fan for a push/push configuration?
Problem: I'm getting a weird humming/air turbulence noise at the radiator. This is eliminated when I slow the down below 1100 RPMs. I can also eliminate the noise with the fan at full speed by placing my finger tip on the intake or exhaust side of the unit. Seems to disrupt the turbulence.
Current setup: I have my H50 in the recommended intake configuration with the included fan. I am using a Zalman FanMate2 to control the fan speed off the CPUFAN header. Pump is plugged into the SYSFAN1 header.
Question: How do I go about retaining a moderately high RPMs/CFM without this odd noise? Do I need a spacer between the fan and the radiator? Add a fan for a push/push configuration?