GPU Lap Dance

O

OPUS1

[H]ard|Gawd
Joined
Apr 25, 2003
Messages
1,766
Well it all started here

and being real bored I decided to lap my GPU:eek:
Taped off and covered the card, then took some 400 paper and sanded till I saw that beautiful copper(guess I voided the warranty;) )
cleaned the mess up with 91% alcohol(antimicrobial) schmeered Arctic 3 on, back on went the Zalman heatpipe(with fan),shoved the SOB back in the slot, turned on the comp and ......nothing crap.:eek:

Took 3 times before I realized that I forgot to hook up the monitor(make note to self, self idot)plugged in the monitor and all is as it should be:)

while its to early to really tell, intial results show around 4C drop in temps and higher potential for ovclk.

Just can't kill the sucker!
Maybe I should flash to 5950 bios?
 
upload somewhere.. then click on the IMG button when u post a thread.. then u type in (or copy the URL for the image).

Simple ;)
 
Send them to me if you want me to host them. Aim - cutiebrian55
Email - BrianNord at yahoo dot com.
 
I lapped and threw a lightweight AL Socket A cooler on mine...

I didnt get any more OC'ing headroom, but I'm gonna try the same heatsink on there after I take the heatspreader off... maybe that'll help MORE...

Time for a volt mod... :D
 
Isn't 400grit a bit coarse? I go to at least till 1500 and that's when I'm feeling lazy.
 
remove the heatspreader
Click to expand...
What u think me nuts!

that's when I'm feeling lazy.
Click to expand...
Thats what got me started!!

I'm not sure the temps would go much lower, this zally HeatPipe/fan and all that i've done so far are showing temps around 25c lower than stock on an ovclk. Without ram sinks.
Maybe when I stop bein a miserable lazy slob I'll try both ur ideas:D
 
any ideas on how to remove heatspreader and once it is off does the exposed core have the same appearence as an AMD chip?
 
You must log in or register to reply here.
Back
Top