Gone and Done it...

Soarin

2[H]4U
Joined
Jul 23, 2010
Messages
2,489
My GA-880GA-UD3H, the ethernet port took a crap.....I think...
I am pretty sure cause no matter what cord i use Ubuntu doesnt connect. and Windows 7 x64 pro doesnt connect. it was working fine last night though...

All my cords tested good with other systems.
Also when i plug a cord in the ethernet lights blink sparatically. And windows will see the connection and attempt to identify it... but fails it does this for like a min and fails each time.....

Can someone reasure me that i neeed to RMA?

And how do you go without a usable computer?....Im scared....hold me
:eek::eek::eek::eek::eek::mad::eek::eek:

EDIT: Okay so i did a lot more investigating and i found a small about .5"x.5" with 2 little 5/16" arms on each 2 edges, square metal part resting on my pciex16 slot and barely touching my motherboard....
No clue what it is but it had to come from either the case or a part inside the pc because there is no open spots for it to fit into the case anywere else.
Also i double checked the contacts on the ethernet port, and recleaned them out and bam now i have ethernet again.
 
Last edited:
a small about .5"x.5" with 2 little 5/16" arms on each 2 edges, square metal part resting on my pciex16 slot and barely touching my motherboard....

That little piece could have been a major disaster. :eek:
 
Yup power er down and get RMA or something else. Or lose other more expensive items.
 
usually if the port is toast, windows will just say "network cable unplugged" but if it's happening across OS's that's probably a bad sign.
 
Ok after letting it run. And cleaning the PC the Ethernet works on both OS's
 
Back
Top