GIGABYTE GA-965P-DS3 and cpu-z 1.4

[compwarez]

i have overclock my motherboard and e4300 to 3.0 on the bios.

i dont know why my cpu-z tell me that is is 333 bus speed x 6 = 1.8 ghz

how do i overclocked my e4300 to 3.0 ghz with this board?

 

[BillParrish]

Hiere is a guide
http://www.hardforum.com/showthread.php?t=1169366

The posts are not in order (the "Before you Begin" post should be first but is not.) scan thru them and you can easily figure out what you should read first.

 

[compwarez]

i think there is something wrong with Cpuz 1.4.

e4300 cpu is 9x and not 6x .but why when i go to cpuz 1.4 it say it is 6x and not 9x.

in the bios , i set like this: 9x 333 fsb =3.0ghz at 833 mem speed.(2.50 ratio)

 

[unclewebb]

You have SpeedStep and C1E enabled in your bios. They are designed to reduce your multiplier to 6X when your computer is idle to save a little bit of power. Turn those two off if you want to always be running at full speed.

 

[compwarez]

i turn off the CIE already. Where is SpeedStep option on the bios is?

 

[compwarez]

i finally work at 3.0ghz.

thank you unclewebb