Fry's B&M: E8500 along with ECS mobo: EO!!

fsh42na

[H]ard|Gawd
Joined
Jul 13, 2004
Messages
1,472
For those of you looking for an EO stepping E8500, I just returned from Fry's Palo Alto with their $179.99 mobo/cpu pkg deal. I asked specifically for an EO stepping cpu (asked the cage lady for a "SLB9K" cpu and received one. So if you're looking for an EO, here's your chance. Price is cheaper than the Egg and you don't have to play roulette and risk RMA charges when you return a CO stepping.

Good luck
 
Which one is better.....Q6600 @ 3600 or this 8500 @ over 4000??? Is it worth replacing the Q6600????:D
 
Damn...I have an e6400 overclocked to 3+ GHz. Should I get this? Would I notice a big improvement? Or should I save my money and upgrade my 8800gt. I mainly use it for gaming.
 
Damn...I have an e6400 overclocked to 3+ GHz. Should I get this? Would I notice a big improvement? Or should I save my money and upgrade my 8800gt. I mainly use it for gaming.

I'm in the same boat. Normal weather I'm at 3.6ghz 1.5v. Extremely hot weather and I'll be down at 3.2ghz @ 1.3v.

I'd much rather head onto 3.6ghz q6600 zone, and the two extra cores would sure come in handy. But the times when I only need 1 or 2 cores, it'd really not be all too different from my current setup. Ehh...

But damn... if I can get an E0 up to 4.5ghz with 1.36v or less, !!!!!!. Almost an extra ghz.

The question for you is are you feeling sluggish currently? For me, all I do is cs:s, and the 8800gt is more than enough. I could definitely use the cpu in day to day usages, so 4.5ghz would be reallllll welcome.
 
The question for you is are you feeling sluggish currently? For me, all I do is cs:s, and the 8800gt is more than enough. I could definitely use the cpu in day to day usages, so 4.5ghz would be reallllll welcome.

CS:S is CPU dependent.. the 8800GT just makes it look nicer XD..
 
Too bad that mobo doesn't support 45nm cpus without the latest bios. Hope you have an older 775 cpu to flash it!

You don't really expect me (or anyone here for that matter) to actually use the ECS mobo from Fry's mobo/cpu combos?:p

This board will be put on a shelf for me to use in my next charity build for friends/family.

I have the following boards to use:

Rampage Formula
P5Q dlx
P5Q pro
Gigabyte DQ6
 
got two e8500 from frys both q822a537 e0 both can't do 4.5ghz with 1.4v and I am currently priming 4.3ghz at 1.31v. these cpus don't scale well with volts after 4.3ghz and run hot.
 
got two e8500 from frys both q822a537 e0 both can't do 4.5ghz with 1.4v and I am currently priming 4.3ghz at 1.31v. these cpus don't scale well with volts after 4.3ghz and run hot.

Everyone has different experiences, just because you can't/can doesn't mean it'll be the same for all other cases. Shouldn't we all know this by now?
 
got two e8500 from frys both q822a537 e0 both can't do 4.5ghz with 1.4v and I am currently priming 4.3ghz at 1.31v. these cpus don't scale well with volts after 4.3ghz and run hot.

What chipset are you running it with? Latest Bios?

E8500 with E0 stepping works very well with my DFI P45 JR T2RS.

Look at the benchmarks, CPU-Z info in this thread a few post above.
 
Everyone has different experiences, just because you can't/can doesn't mean it'll be the same for all other cases. Shouldn't we all know this by now?

i'm just posting my results and you act all defensive. lol....well i'm just gonna keep my e8400 c0 that can do 4.2ghz at 1.37v prime stable. just not much difference here for me to keep this e8500.
 
What chipset are you running it with? Latest Bios?

E8500 with E0 stepping works very well with my DFI P45 JR T2RS.

Look at the benchmarks, CPU-Z info in this thread a few post above.

dfi p35 dk with the latest bios. i can get them into windows at 4.7ghz no problem but not prime stable. tried 4.6 down to 4.4. these things run hot with my tuniq.
 
not different? How's 4.5ghz is not different from 4.2ghz at pretty much same voltage?
 
i couldn't get them prime stable at 4.5ghz @ 1.4v where my e8400 4.2ghz c0 were 8hr prime stable at 1.37.
 
i couldn't get them prime stable at 4.5ghz @ 1.4v where my e8400 4.2ghz c0 were 8hr prime stable at 1.37.

For dnottis (member here and at xtremesystems), e8500 Q822A544 is prime-stable at 4.5ghz with 1.38-1.39v watercooled, so ...
 
Anyone willing to buy an additional combo for me and I'd pay ya back. :eek:

Colorado really needs a Fry's. But hey, at least we have a few Microcenters lying around. :/
 
He's on highend water and had to lap he's cpu to make it prime stable.

Who's to say people buying won't be doing the same? Price is right and you're for some reason edging people not to take the jump because you can't get it running higher than your e8400 (which can also y'know, be attributed to human errrrrorrrrr). $180 incl mobo which you may be able to return at a later date for even a bigger discount.
 
LoL, ur a funny guy. How am edging people not to buy? I just posted my results for my batch. Another batch might just do 4.7ghz. Stop being defensive for no reason and I've been playing with this cpu all day and I know what it can't and can do. Also, I got this chip for $149.99 deal and not this combo for your info. Yes, I had high hopes for a great e0 clocker but thats now what happened.

I'll end this chat with you here and now because I know talking to stubborn people like you is like talking to a wall.

Oh, here is a little pic of my e0. not bad but still disappointing to me.

 
and you can't lap your cpu? lol, you can ge the same results with just a little effort and decent air-cooling

Just letting you know your comparisons aren't accurate and a majority of people don't lap their cpus.
 
Yea exactly, another batch might do more. All you've been doing is trashing this chip because your results weren't like you envisioned, what did you expect, some magic boost in o/c? Already been discussed in o/c and intel section that the c0 and e0 may or may not match in performance.

Refer to this http://hardforum.com/showpost.php?p=1033088834&postcount=420 e8600 e0 4.5ghz air. You're the one who's too stuck in the "my e0 suxxx" (how many times did you mention my c0 > e0 wahh wahh wah) world that you can't accept that this is a great deal for people looking for one.
 
I'm just gonna reply this once more to say how much of a dumb shit you are and sound. Besides my first post which was to state my experience with these chips....nothing more. All my answers were replies to other people's comment retard.

Oh, I can run 3dmark with 4.5 1.4v also...doesn't mean it's stable. Hell, you want a to see me in windows at 4.7ghz? I can do it with this chip also. No, this e0 is better then my c0 it does 4.3ghz 1.31v priming 2hours already as I type.
 
Look through the entire post I linked. And you sir are more of a moron because all you've been doing is muling about how your chip can't run like you want it to.
these cpus don't scale well with volts after 4.3ghz and run hot.

Since you seem to indicate that all of these cpus are like yours. Using names now huh, how mature of you lmao. Always gets me when people like you get all worked up.
 
Cheers for sharing your results Peter949.
Lowteckh seems to be having a bad day.

I have an early E8400 which did 4.35GHz at 1.45V and I run it 24/7 at 4.1GHz, 1.4V.
TRUE 120 heatsink with silent 120mm fan.
 
My overall oc for this chip for those interested. Best performance per voltage with prime stability that I was able to achieve.

 
I now own a new ECS G31T MB that I'll more than likely be selling in about 2 weeks. :D
 
Back
Top