Friend being shocked by case...

TheBlank

Limp Gawd
Joined
Nov 15, 2006
Messages
164
Okay, so I rebuilt my friend's PC a few months ago. We got him an Antec P180 case and a replacement abit mobo for a p4 northwood. Everything starts up fine. There was a nagging issue where the machine refused to boot past POST (simply turning itself right back off) for a few times before allowing the machine to run. Further replacement parts and BIOS updates later, the problem is down to 2% of startups does this occur.

However, there is a new issue. About a week ago he informed me that when opening the front panel to turn on the machine, a spark jumped from his finger to the case. Then the power button didn't work until he turned off the power strip the PC is plugged into and then back on.

Then he tells me yesterday that when he went to plug in his Portable HDD into a front panel USB port that another spark arced from the USB port to the plug. The HDD was not powered or plugged in at the time. The computer froze at this point and he had to hold the power button to get it to turn off. Once again, he had to turn the power strip off and then back on for it to even consider booting up again..

From what I can tell, the motherboard is properly mounted. I can't find anything along the paths that would be causing this... Is there something wrong with PSU? Or does this have something to do with the power strip...

I won't be able to touch the machine again until Sunday at the earliest, as I will be out of town.

Any help at all would be greatly appreciated. Thank you in advance.
 
I had a friend with similar issues that were from a cheepo psu atx connector. Your friend may want to try running the computer out of the case to see if anything changes (if it is really a grounding issue)
 
What are the specs of your friend's PC? Include the brand, name and wattage of the power supply as well.
 
Abit IS7-E2 motherboard (Refurbished, came with bent front panel pins...dun dun dun...)

P4 3 ghz Northwood.

Zalman CNPS-7500Cu

2 gigs Corsair XMS DDR 800

GeForce FX 5900

Antec Neopower PSU 480 watt (Originally my PSU on my northwood machine which I recently scrapped. It never had a problem before.)

Antec P180 case.

New Litescribe DVD burner, but I forget the make.
 
Is your friend a dark lord of the sith ?

Check the socket as well, possibly not grounded correctly?
 
outlet probably isnt grounded properly
 
Is your friend a dark lord of the sith ?

He wishes... although he is plenty evil in his own right... Ironic enough that his most recent comic deals just with that fact.

Check the socket as well, possibly not grounded correctly?

That's what we're thinking too. His power strip is one of those older "sits under your monitor" types. He has had things blow out on it before, in fact what caused the original rebuild was a blown PSU, so I'm wondering is that was the cause of that as well. I have him swapping out the power strip for a different one to see if the grounding for that unit has been compromised. If that doesn't work I told him to run an extension cable from another outlet.
 
That's what we're thinking too. His power strip is one of those older "sits under your monitor" types. He has had things blow out on it before, in fact what caused the original rebuild was a blown PSU, so I'm wondering is that was the cause of that as well. I have him swapping out the power strip for a different one to see if the grounding for that unit has been compromised. If that doesn't work I told him to run an extension cable from another outlet.
That sounds like the cause, if it still occurs I'd try re-seating the mobo.
 
Back
Top