First time hotflash problem

wesleys_dad

[H]ard|Gawd
Joined
Jun 21, 2005
Messages
1,271
Hey guy I need some opinions on my hotflash bios...
story is I have an abit ax78 am2+ mobo and a while back windows screwed up a flash...so I order another from abit and all is good ,so today i try and do a hot flash with the old bios chip using the new beta bios 14 and i do it through dos using a floppy.
I boot with the good chip and when in dos i remove the good chip and install the crashed chip...awdflash comes up and tells me to input the file and i type the correct...then it goes to flash and says disk not ready..Im assuming disk is the chip so does this mean the bios chip is history? Ive tryed it like 3 times and all came up the same...
just wondering if anyone else had this happen?
Its a royal pain booting with one chip and removing it, installing the other chip trying to flash and then have to start all over..the chip is a pain to get to with the video card in..I need input before i go through this again......thanks guys ....
 
Are you sure that "disk" means the Bios chip? Is the floppy bad?
 
just for curiosity sake, can you flash the working bios chip off of the same floppy?
 
just for curiosity sake, can you flash the working bios chip off of the same floppy?
trying not to do that in case it screws up so at least i have a working bios 12 chip i can use...abit is gone now or id just order another chip and try it.....
 
If you have another board with the same bios chip even if it's another brand/manufacturer, you can hotflash using that even though it's completely different hardware. I'm not sure what kind of random hardware you have lying around.
 
Back
Top