First time build gone bad :(! Please Help!

RabidRodents

Limp Gawd
Joined
Nov 8, 2004
Messages
128
Hey, this is the first computer i've built, but I have some serious problems.
VNF3-250 Chaintech Nforce 3 Mobo
AMD 64 3400+
1x2 512 Kingston Value Ram
MSI GF6800

Heres some of my problems:
1. In slots 1 and 3, it reboots over and over. In slots 1 and 2, it reboots after 15 minutes. In slot 1, it seems to work fine.
2. On one monitor, it works fine, but in moving somewhere else and switching monitors, it suddenly does not work. The monitor is distorted. I tried with a different PC box and it seemed to work fine.
3. When I put a CD into a cd drive, it reboots. Period.
4. [Minor Problem]: I have a thermaltake case and temp readout, but the fan controlers dont work. The fans run full speed, no bigie, but still annoying.

Question: I have a 430w psu, is that enough to run the 7 fans, temp readout, and other? A few fans dont work, so Im thinking that when reading a cd, running fans, its running out of power?

Any input or response would be welcome! Thank you.
 
Yikes, sounds like a rough first try.

What brand power supply do you have? Even if it says it's rated for 430W, if it's a cheap piece of crap pumping dirty power into your system, that can really screw things up. Also, does it have certain power cables for fans and certain cables for your drives? If so, do you have them plugged in to the right things? Also, check that you've got the pins going from the case to the motherboard connected correctly.
 
I think you're right. My PSU is called EZMEDIA, 3.3v=26a, 5v=32a, 12v=13a This is pretty crappy i've read. Also, the MSI GF6 seems to have many problems like this, so I may just return it. Any other ideas?
 
definitely a mem problem there somewhere, along with a cd driver conflict.
 
PSU for sure, it take more power to run two sticks of ram thats why one would work and not both.
 
i would hesitate to blame the psu... a 430w power supply is pretty powerful (keep in mind that only 3 of my comps are newer than 1998...)
 
430 watts is plenty. The real problem might be the ram as there are quite a few accounts of that kingston ram not working in that board (which is why I didnt buy that board). Faulty ram can cause or sorts of weird things to happen, like instant reboot. I would suggest to take back tha ram and get corsair or crucial or azen even. (Proof is in the pudding. www.kingston.com, that board is not listed as working with their memory. )
 
Wattage isn't the only thing you want to look for. A 430 Watt PSU from a cheapy company could perform WORSE than a 350 Watt PSU from say Enermax.

Like someone said, 13A for a 12V rail is fairly low. I believe my 350Watt Enermax puts out 26A on the 12V. It definately sounds like a PSU problem though, and a memory one at that. I'd recommend first thing is pick up a good 450 Watt PSU from a respectable company (Enermax, Thermaltake, etc).

Then see if that fixes some of ur instabilities (such as rebooting with CD-Rom in there) and then try to figure out the memory problem.
 
first thing replace psu. 13a is way to low, amd 64 are power hungry.second when you replace psu run memtest 86 and check that ram! general rule of thumb today is nothing under 16a on 12v rail :)
 
Look guys, this is definitly a memory issue. This same problem has occured over and over again, the one thing in common, the memory. They are all trying to use kingstong value ram. Check the kingston website guys (www.kingston.com) its not listed as supported. The solution? Replace the memory, same as the other cases.
 
Look guys, this is definitly a memory issue. This same problem has occured over and over again, the one thing in common, the memory. They are all trying to use kingstong value ram. Check the kingston website guys (www.kingston.com) its not listed as supported. The solution? Replace the memory, same as the other cases.
I dont disagree with you ! but you need a solid psu before you blame the memory more often people skimp on their psu when they first build a rig, a poor performing psu would mimick a memory problem
 
I wonder if that's 13A @ 25C? That's what temp most specs are listed at... so at typical power supply temps of 40C you would be getting even less than 13A.
 
Thanks for all you're help guys, this build really depressed me with all these problems =\
I ordered a 1gig stick of sair ram and got credit for my kingston, as for a PSU, what do you guys suggest. I checked out psus at newegg and could decide. The thermaltakes looked great at supplying amps and still remaining cheap. 28a/40a/18a 3.3v/5v/12v any recomendations under 65ish? Thanks Again!
 
Thermaltakes will definately fair you better than your generic. However, if you head down to the power supply forum and read the faq, there will be a list of reliable and (somewhat) cheap PSUs for you to pick up.
 
Back
Top