RabidRodents
Limp Gawd
- Joined
- Nov 8, 2004
- Messages
- 128
Hey, this is the first computer i've built, but I have some serious problems.
VNF3-250 Chaintech Nforce 3 Mobo
AMD 64 3400+
1x2 512 Kingston Value Ram
MSI GF6800
Heres some of my problems:
1. In slots 1 and 3, it reboots over and over. In slots 1 and 2, it reboots after 15 minutes. In slot 1, it seems to work fine.
2. On one monitor, it works fine, but in moving somewhere else and switching monitors, it suddenly does not work. The monitor is distorted. I tried with a different PC box and it seemed to work fine.
3. When I put a CD into a cd drive, it reboots. Period.
4. [Minor Problem]: I have a thermaltake case and temp readout, but the fan controlers dont work. The fans run full speed, no bigie, but still annoying.
Question: I have a 430w psu, is that enough to run the 7 fans, temp readout, and other? A few fans dont work, so Im thinking that when reading a cd, running fans, its running out of power?
Any input or response would be welcome! Thank you.
VNF3-250 Chaintech Nforce 3 Mobo
AMD 64 3400+
1x2 512 Kingston Value Ram
MSI GF6800
Heres some of my problems:
1. In slots 1 and 3, it reboots over and over. In slots 1 and 2, it reboots after 15 minutes. In slot 1, it seems to work fine.
2. On one monitor, it works fine, but in moving somewhere else and switching monitors, it suddenly does not work. The monitor is distorted. I tried with a different PC box and it seemed to work fine.
3. When I put a CD into a cd drive, it reboots. Period.
4. [Minor Problem]: I have a thermaltake case and temp readout, but the fan controlers dont work. The fans run full speed, no bigie, but still annoying.
Question: I have a 430w psu, is that enough to run the 7 fans, temp readout, and other? A few fans dont work, so Im thinking that when reading a cd, running fans, its running out of power?
Any input or response would be welcome! Thank you.