• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

First AMD64 Overclock

K

Keetha

Limp Gawd
Joined
Aug 16, 2004
Messages
356
It is 9.5 x 240 = 2280 and voltage of 1.65.
Ram is running at 5:6 so it is 190 with timings of 2-3-2-5
This is with a stock cooler and 2ghz default. It's for someone else, so I didn't push too hard so it will be 100% stable. It's on the Asus K8N with a SATA drive. According to Anandtech, using a SATA drive on this motherboard limits the OC severly. It idles around 39C and maxes at 51C under full load. Just looking for any opinions or suggestions or something :)
Thanx!
 
dang thats quite a low multiplier you got there good job on high fsb... i wish my memory could handle high fsb
 
SidewinderX said:
if you notice, his memory is 5:6 not 1:1
Click to expand...
didnt notice that... good point.. i wish my memory could go past 200 mhtz cas2.5.. but i think the benefits of fsb is less then cas 2.5
 
You must log in or register to reply here.
Back
Top