Lian Li PC 65U
Mods:
How I did my wiring,
For those of you with a Lial Li one of the best spots I found to hide wires was under the hdd cage. I took the front usb connectors off so that way they were not interfeering. My inverter for my leds is under the hdd cage with the wires comming out to where the bottom of the lights are. If you go to the album page and look at the last pic, you will notice the holw I cut, I put all my wires that come out of my psu to go in there. Then from behind I figgured out what wires I needed. Then your bring out the wires between the edge of the floppy cadge and the end of the mobo. for me that was. 2 lines of cables with 4 connectors, hd, videocard, dvd and switch. then my 20pin mobo cable for power. Try to get this far away from your window, that way they look smaller. I put my switch for my ccf's in my drive bay it fist perfectly and very snug. The next thing I am going to do is do something with my 20piner, the default heatsrink and cover went far, but they didn't want to do it so much that u could not bend it. If you have any more questions let me know.
http://lastik.xaled.com/userfiles/lastiK_/palbum2.htm
pics found here and ^^^^^
Mods:
- drive stealth
- hole for psu wires
- wiring job
- rear fan grill
- switch
- soon to make a stealthed push buton in a 3.25 bay for my ccfl's
- sound dampening foam
How I did my wiring,
For those of you with a Lial Li one of the best spots I found to hide wires was under the hdd cage. I took the front usb connectors off so that way they were not interfeering. My inverter for my leds is under the hdd cage with the wires comming out to where the bottom of the lights are. If you go to the album page and look at the last pic, you will notice the holw I cut, I put all my wires that come out of my psu to go in there. Then from behind I figgured out what wires I needed. Then your bring out the wires between the edge of the floppy cadge and the end of the mobo. for me that was. 2 lines of cables with 4 connectors, hd, videocard, dvd and switch. then my 20pin mobo cable for power. Try to get this far away from your window, that way they look smaller. I put my switch for my ccf's in my drive bay it fist perfectly and very snug. The next thing I am going to do is do something with my 20piner, the default heatsrink and cover went far, but they didn't want to do it so much that u could not bend it. If you have any more questions let me know.
http://lastik.xaled.com/userfiles/lastiK_/palbum2.htm
pics found here and ^^^^^