soulesschild
Supreme [H]ardness
- Joined
- Feb 18, 2007
- Messages
- 6,176
So my boss has asked me to configure out a server from just bare parts, so no pre-builts or anything. The lower the cost, the better.
Requirements
able to hold 24 hot swap with 2 boot drives, so 26 total
Decent raid card(s)
OpenFiler or Solaris support
Rackmount
Where should I get started?
I wanted to get a Norco, but unfortunately, none support the number of drives.
Possible case: http://www.newegg.com/Product/Product.aspx?Item=N82E16811152124
Not sure how the 2 internal drives are mounted, review says optional bracket >_>
Possible parts:
Case: http://www.rackmountnet.com/supermi...lots-1200w-redundant-power-supply-p-3125.html
RAID: Took back this since I can't seem to find a mobo with x3 PCI-X
MB:
CPU:
RAM:
Requirements
able to hold 24 hot swap with 2 boot drives, so 26 total
Decent raid card(s)
OpenFiler or Solaris support
Rackmount
Where should I get started?
I wanted to get a Norco, but unfortunately, none support the number of drives.
Possible case: http://www.newegg.com/Product/Product.aspx?Item=N82E16811152124
Not sure how the 2 internal drives are mounted, review says optional bracket >_>
Possible parts:
Case: http://www.rackmountnet.com/supermi...lots-1200w-redundant-power-supply-p-3125.html
RAID: Took back this since I can't seem to find a mobo with x3 PCI-X
MB:
CPU:
RAM:
Last edited: