fan speeds? need advice.

xnikx

[H]ard|Gawd
Joined
Oct 25, 2006
Messages
1,730
i want to make my fans on my cpu hs and my gpu faster so they cool better, my cpu and gfx r a bit hot. e6600 and 8800GTS. I had my gpu fan at 100%. I was talkin to someone on css and he sayd i shouldnt put the fans at 100% because it will wear them out faster. I dont want to have to change the heat sink on them or the fan on the 8800GTS. He sayd 75% should be good. What do you guys think?

At stock fan speeds after playing oblivion and quiting my GPU will be at 72C and my CPU will be at 59C
 
You need better case ventilation.

Running fans at 100% will wear them out faster... They might die 2-3 years early... So you've got a good 5-8 years with them before they'll croak ;)
 
Run your fans at whatever speed your ears can handle. If you don't mind the noise run them at 100%. I think even at full speed a decent fan will last a couple years. Probably quite a bit longer.
 
If you run your fans at 100% and it does the job and the noise is not too bad then leave it like that. If your fans die a little earlier who cares. Better your fans than parts that are expensive.
 
idk about oil, never knew oil got inside the case. But ill remove dust as much as possible when ever i see a big build up ill remove it.
and theres like no vga coolers compatible with the 8800s
 
If you run your fans at 100% it's not like they will die on you in 6 months. Run them at the speed they need to cool the hardware properly.
 
how long do you think it will live for?

what if i set to like 85
 
Well I would not suggest run the CPU fan 100% at all times but I would suggest you download Speed Fan and set it up so the fan turns on based on temperature, and you can set it for whatever speeds you like. I set my Zalman 9700 to be at 40% speed with a maximum of 100% speed, then let Speed Fan maintain the fan speed according to the current CPU temperature.That way the power is in reserve until you need it and the system is very quiet at other times. 40% speed on a Zalman 9700 you can't even hear it and even that speed it does a lot of cooling.
 
Speedfan is very useful for PWM fans. Yes, it's a good option.

FYI op, I've got a 12v (120mm) fan running at 15v to cool my room at my cottage. It's on an old BIP radiator that's cooled by a 225w TEC outside (awesome summer project ;) )

I've run it straight for at least 5 summers (may-oct)... and that's at 125% speed. So, running it at 12v (its rated spec) should keep it around for at least 5-8years.

Removing dust, and re-oiling the bearings (if you're so inclined) is more important than undervolting.

[BRO]Alaskan;1030456849 said:
I would expect the life of a stock cpu cooler's fan would be about 3-5years at 100%

I've had a Powermac G3 desktop since 1998, still running with the stock fan. It's on 24/7 as an itunes server.
 
with speed fan can i make it so when my gfx card hits 70C it goes to 100% and my CPu when it hit 60C its goes to 100%. im not so worried about the cpu heatsink fan dieing cuzz when it does i can just buy a better one, i dont want me gfx fan to die tho.
 
with speed fan can i make it so when my gfx card hits 70C it goes to 100% and my CPu when it hit 60C its goes to 100%. im not so worried about the cpu heatsink fan dieing cuzz when it does i can just buy a better one, i dont want me gfx fan to die tho.

I don't know of any way to control video cards with Speed Fan it is just for motherboards and hard drives as far as I know. There are some video card tools like ATI Tray and Riva Tuner that let you control the fans on the video card.
 
300+ proc
500+ VC
and your worried about a couple of fans also after 3 years you'll have at least a new video card.
 
Back
Top