EVGA P67 w/SLI $50!!!

Interesting (if true), one reviewer said the bandwidth on the PCI-e slots is x8/x8 even if one card is installed, ie. no x16 on just one card. That's a new one to me, if true.
 
Even if true, the x8 bandwidth has a minimal impact even on the fastest current GPU's.
 
Just built a HTPC around this. Besides the fan header speed adjustments not working, its been great to work with.
 
I know my EVGA Z68 is 8x/8x, so having the P67 version similarly us not a surprise
 
I just bought one for an HTPC. I have a 65W i5 2400S. I bought the one-year additional warranty for $3.99. Thanks!
 
Picked one up, once I get the 3770K, I'm gonna pop my Celeron G530 on this board and finally set up my Homeserver
 
Well, this sucks...the latest BIOS for both the Z68 and P67 versions are both a year old....Granted, I'm not tossing an Ivy Bridge in these, but still......
 
Was thinking about it but the lack of mosfet or VRM cooling is a turn-off even for the price because that puts a big ? on any oc other than stock voltages.
 
P67 = no onboard gpu. just a friendly reminder.

I just got a MSI HD 6450 for $20 after rebate. Much better than on-die graphics anyhow, while sipping electricity.
 
I've had nothing but good experiences with EVGA. I was having severe frame rate drops in Diablo 3, so they replaced my 670 and sent me a 670 FTW on their dime. I'm not even 100% sure it was the card, but I am 100% sure that they were on top of it and did right by me. That makes me a loyal customer and compels me to share my experience with you.
 
Back in the day I had a Geforce 7900GT that burned out, and they sent me an 8800GT as a replacement...
 
Tempted, as my next build will undoubtedly be a mini or micro ATX build, but I want to wait for Haswell.
 
Picked this up to make a Natural Selection 2 server, I need to get a 2500k to 4.5ghz+.

EVGA skimped out on this board and did not put heatsinks on the VRM's, yet they tout its overclocking features. :rolleyes:
 
Why cripple such a nice rig with sub par sound? Onboard has come a long way but its not near as good yet.

I got tired of 10 years of shitty 3rd party drivers + bloatware (mostly from creative, so that's probably not fair to others).
 
Why cripple such a nice rig with sub par sound? Onboard has come a long way but its not near as good yet.

If you meant me, well:


My girlfriend is hard of hearing on her left side, deaf on her right side -- the extra quality doesn't help much at all -- even put her on a Cowon D2 with some Grado SR125 and Ultrasone HFI 580 vs an iPod with some crappy circumaural headphones and she really didn't hear much difference since she can't hear certain frequencies...

Anyway, with the volume turned nearly to max it didn't cause distortion, which would have made it a problem for her, when the sound did work.
 
My initial reports with this board is you will need heatsinks on the VRMs for any decent overclocking.

Its throttling because the VRMs are getting too hot. I can run 5ghz @ 1.45vcore and the board will start to throttle the CPU down to 3.2ghz when the VRMs get hot, CPU never gets above 75c. (it will even throttle at 4.5ghz 1.35v) If I change the VRM switching frequency to 250hz (bios says it generates less heat the lower the switching frequency) I can stress test almost twice as long before it starts to throttle.

Tomorrow I will affix some heatsinks to the VRMs and that should fix it methinks.

Otherwise its a pretty nice board for the price, good quality. BIOS is rather limited though, but it works!
 
Back
Top