evga 680i error code 25?

Reza

Limp Gawd
Joined
Sep 13, 2008
Messages
442
Ok, so i've been fighting with my computer for a while now and i've finally decided to swallow my pride and ask for help, plus i just got internet at my news place.

I just moved into a new place and realized quickly that the temps on my OC on my cpu was a little hot, just a couple degrees, not really anything to worry about but i treat my hardware very good so i decided to turn the oc back down to stock until i got my water cooling loop up and running. My gpu was also starting to artifact in games, so i dropped the oc down and it kept artifacting so i turned in back down to stock and it was fine.

after i did this i felt my system was being a little buggy, it would start up and my mouse and keyboard would not respond, it would randomly freeze and then my system started booting with no video response. The fan on my gpu was spinning and everything booted fine all the way into windows. (the only way i know it booted into windows is because i left my speakers on to see if it would boot all the way and it did.) And then when i would restart it via windows or the reset button it would hang on error code 25 via the LED indicator on the motherboard. I have an old 8800 gts for times like this and i popped out my 55nm gtx 260 and threw in the old 8800 gts and it booted like a champ although it still hung at any restart on error code 25. i would have to power off the system and sometimes ever unplug it until the all the power drained out and then it would boot fine.

I just blamed it on vista (32-bit) and decided it was way past due going back to xp. After i backed everything up i wiped the hard drive and got a fresh install and everything was working fine, i didn't restart it do to thinking that the fresh install solved the problem. I installed the drivers for my gtx 260 and thought it would work fine, popped it in and got the same problem no video, and i was still getting the error code 25 on restart even with the 8800 gts. I started to think my card was bad but then i put the 260 in to a different pci-e slot and i got response!! but all i could do was boot into the bios and it was telling me to put the card back in the 1st slot, which was still not working. I googled everything i could on the error code 25, i reset the cmos which helped but didn't really fix anything, i updated the bios on my motherboard, updated the 260 drivers to the newest 185 drivers, i updated the drivers for my motherboard and nothing. Everything i have tried has now worked, i checked to make sure everything was plugged in right and it is. I thank any one for reading this far and hope someone could help me with my problem.
if not i guess i'll be in the market for a new motherboard.

The system i'm running is

c2d e6600 was oc'ed now everything is stock
2x2 gigs of crucial ballistix
evga 55nm gtx 260 and evga 8800 gts
creative audio sound blaster audigy 2 zs
antec TPQ 850

Thanks for any help!
 
So after doing some more work messing around with my system i've figured out that the error code 25 was being caused by the sound card for what ever reason. i took it out and everything works fine. But my gtx 260 is hanging at error code 2b which is failing to initialize, tested it in another computer and it worked fine. Whats the problem?!?!?!
 
I would bank on your motherboard being damaged.

You can test to see if it is shorting out in the case. Run a bench test on a piece of card board with minimum components.

First try just the cpu/heatsink and psu attached to the board. Note what post code it stops on.

Second add a single stick of memory (usually installed closest to the CPUt) note what post code it stops on.

Then try the video card and see if it POST

If you get it to post, plug in a cdrom and boot to a memtestx86 cd or most any linux live cd as it will have memtest.

Try to run memtest to determine if a module is bad.
 
just wondering.. have you bothered to reset your cmos yet? sometimes having them powered off for a while can cause weird things.. id try resetting the cmos before completely saying its the motherboard..
 
yea, i reset the cmos and nothing happened. I moved the jumper, started it up then shut it down and moved it back and a different time i took out the battery and started it up and neither of these really helped. I even flashed my mobo bios up to the most recent and none of this helped. I think its the mother board, its weird cause it still works and it even games, it just doesn't want to run with my gtx 260, even tho i know that my 260 is fine because i tested it in another rig. Well i think i'm just going to go for a new motherboard.
 
ust sell the 680i for $50, with a side note that it won't work with GTX260's.

you'll make some cash for a new board, and you can upgrade to a nice nifty P45 board.

hint, don't buy the Biostar Tpower I45 board. its crap.
 
lol yea thats what i'm planning to do. I've already been looking around for a new board, i was thinking 780i ? Any suggestions?
 
Back
Top