Evga 680i and q6600 overclock.

fociz

Limp Gawd
Joined
Dec 16, 2006
Messages
347
Hi.
Anyone out there running this mobo with a goood oc on a G0?

I cannot get stable at 3.0gz
You guys see anything im not?


Mobo: evga 680i nf68 rev.A2
bios P32
proc q6600 GO
ram: 4gb gskill pc2-8000
video:8800gtx
win xp pro sp2.

I currently have the fsb bumped to 1333
Memory unlinked@1000mhz 5-5-5-15 2T

P32 bios claims to have fixed temp reads, better stability with quads etc. etc.

temps in bios are 47-50c
core temp is 39-41c(huh?)

cpu core 1.4
cpu fsb 1.5
memory 2.0
nforce spp[auto] 1.3
nforce mcp[auto] 1.5
ht nforce spp<>mcp[auto] 1.2

apci enabled
nvidia gpu ex disabled
apic disabled

legacy usb enabled.

all spread spectrums disabled.

temps seem off from bios to core, vcpu core seems off too from bios to cpuz.

What am i not doing here?
 
Man..no love from anyone..

Well i upped cpu core to 1.485 in bios and cpuz reads 1.39 so i think im ok, ran prime95 and temps reading as high as 87c on the first core, i got down and actually did the "touch" test and everything is just warm accept the R50 mosfets on the board itself, they are pretty toasty.

Anyway i dont know whats holding this chip back..
 
Try bumping your GSkill Voltage to 2.1, which is it's perferred voltage for the speed your running it at.
 
82 C is way too hot. What config do you have your RAM in? and what heat sink do you have

Im not sure i understand the question, ram is unlinked running 2t, hsf is the freezer pro 7 w/ as5 correctly.



Proc idles at 40c's but running prime95 did hit 87c but thats just it, im not sure if temps are accurate or not, ive grown to hate this fucking evga 680i board, nothing seems to work as intended. Bios flashes seem to fix one thing and borks another.

I bumped mem volts to 2.1
 
hmm is that 87C for the cores?

That does seem hot... what heatsink are you using? maybe try reseating it? reapplying the thermal paste? pluging in the heatsink fan *joke*

Thing is you say you've done the touch test... if your cores are reading 87C, it could be the heat isn't reaching the heatsink to be disapated properly or 'felt' during your touch test.

Also your core voltage seems extreme for a GO processor, whats it's default VID voltage? (Try 0.02 - 0.05V above VID)
Extra volts results in a lot of excess heat and if your cooling isn't great then there is a chance it's becoming too hot not because it's being OC'ed but because your pumping too much juice through it...
 
I'm confused by -
"I currently have the fsb bumped to 1333"

What multiplier and FSB setting are you using? Try Multiplier 9 and FSB 334
 
I know a couple of people who had similar trouble with nVidia 680 chipsets. No matter what, they couldn't get much out of quads. I know one of them got an IP35 Abit board and was able to take the quad up to 3.52Ghz with no trouble. I would say there is a good chance the chipset is what is holding the processor back.

Also, the heat seems really really high on that thing. I would doublecheck the mounting of the heatsink to make sure that isn't the problem. That heatsink, while not the best, should not be getting anywhere near those temps. Also, the heatsink should be more than just warm if the processor is running that hot. That would be another indication either the heatsink isn't mounted correctly or there is something wrong with your application of the thermal paste.

 
Yea i heard quads on 680i's are trouble also. Do you have a dual core maybe a e6750 or a e6600 to try and see if it overclocks good. Maybe borrow one from a friend and test it , and if it overclocks well then you know the board has issues with the quads then.

Good Day
 
Back
Top