EUE Storm

J

jfb9301

[H]ard DCOTM x4
2FA
Joined
Jan 11, 2005
Messages
1,751
So my production as of late has been less than my average.

The SWMBO got me a new HDD for X-mas (WD Caviar Black 750G), and I installed Vista Business. That down time combined with constant battling with Vista's UAC cost a few points. As of right now I have maintained UAC and yet managed to make end runs around it so that folding and all my other software starts automaticly.

Then came the blackout that struck Oahu. 1 Lightening strike took out over 90% of the entire island. The darkness lasted around 14 hours. Cost? around 4000 points from my main rig and I had 2 749 pointers decide to start over from 0% due to improper core termination. Frustrating, but what can you do?

And now the root of the problem. it started last night about 15 minutes after I went to bed. My GPU rig EUEed out and didn't run for 8 hours. This morning I deleted my queue.dat and restarted (I've EUEed out before and that seems the simplest, quickest recovery). FAH GPU2 promply downloaded a new work unit and crunched it just fine. Then EUEed out on the next one. Odd. I checked the ver. of the GPU2 client 6.20r1, I had thought I had 6.23, so I downloaded 6.23 copied it over and restarted. Crunched fine and EUEed one the next unit. This time I deleted both FAH11 and FAH13 cores. I'm back up crunching again, but I'm not sure how long. Suggestions?


FAH Client: 6.20r1 and 6.23
FAH Core 11: 1.19 before and 1.19 after
FAH Core 13: 1.19 before (have not DLed a new one)
nVidia Drivers: 180.60
OS: Vista Business 32 Bit SP1
GPU: 260GTX OCed 713 core/1566 shader/1244 Mem (still happens if I back down a notch to 689/1513/1244) both have been 100% stable folding)
GPU Temp 65C
the rest of the details should be in my sig



 
I'm back in my apartment for a week, trying to finish my book before the year is out (that's not happening, but c'est la vie) and so I started my main rig back up. I seemed to be getting an EUE/Unstable machine every other unit with settings that have been 100% stable. Seems we had the same problem, except...

Today I turned on my monitor and it had EUE'd out and was getting some heavy artifacts at desktop. Temps/fans were fine, clocks were under stock (what I set them at, to see if the card was just overheating). I'm going to keep an eye on it, but I have a feeling this card is on its way to a RMA.


Oh well, sorry I couldn't be any help.
 
now that you mention it, I had not made the association.

I only have some of the logs still. but reading back the WUs that NANed and then EUEed were 5765 and 5766.
 
You must log in or register to reply here.
Back
Top