Ethernet Switch Installed in ISS

Terry Olaes

I Used to be the [H] News Guy
2FA
Joined
Nov 27, 2006
Messages
4,646
Look out, the International Space Station is moving into the 80’s. An HP ProCurve 2524 switch was installed in the ISS as part of a network upgrade to half-duplex 10Mbps speed. The switch was an off-the-shelf part with no special modifications. I hope they left a spare as I don’t think HP’s support covers orbital delivery.

Switches from Cisco, D-Link, Avaya, 3Com, NetGear and Hewlett Packard were exposed to extreme levels of radiation in a particle accelerator in Villigen, Switzerland under conditions similar to space. …The switch underwent three years of development, configuration and qualification testing before it journeyed into space.
 
Awesome. I get to rub this in the faces of the the people who thought I was crazy when I ripped out all of our Cisco equipment and put in HP because of cosmic rays. :D
 
At $10k/lb shipping cost I suspect any replacements are stored on the ground and would be ferried up in the next scheduled flight.
 
At $10k/lb shipping cost I suspect any replacements are stored on the ground and would be ferried up in the next scheduled flight.
That's really not much worse than what FedEx charges for Same Day service. (Yes, it exists. Yes, it's ludicrously expensive)
 
cool! i have one of those sitting on my shelf... weve moved to all gige so its just kinda sitting around as a spare lol
 
I learned about this tidbit at the Beyond the Edge ProCurve Seminar back in May, As a Cisco guy I wasn't really wanting to explore other brands, but I really like what HP offers with the ProCurve line up. It is nice that they are IETF/IEEE based and not hooked into propitiatory standards based off of IETF/IEEE standards before they are ratified.

An believe me, I asked about the Next Day replacement guarantee for the ISS as well. ;)
 
2524 seems like an odd choice, as it has a moving part in it (fan).

The 2510-24 seems like it would've been a better choice, as it is basically the same, but with no fan, and updated/die-shrunk components.

I guess they want to go with something that's tried and true.
 
Space rating hardware takes a long time, so any hardware being used is far from state of the art. Also chips made with smaller processes are more vulnerable to radiation damage, so the die shrink is actually a negative.
 
Do copyright laws apply in space? This may be the next safe haven for thepiratebay ;)
 
Back
Top