• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

ds3l and e3110

J

jcmuse

Limp Gawd
Joined
Feb 10, 2006
Messages
329
since the e8400 doesn't seem to be in stock anywhere .. im considering going with a e3110. Anyone know if the two are compatible?
 
So far I have read a lot about E3110 CPUs (I use 2 myself) and todays mobos and so far I have seen nothing indicating that there are compatibility issues with the E3110. The only thing you need to be sure of is you have a bios on your board that supports the 45nm chips. Otherwise it will go into a reboot loop and the only way to get over this obstacle is to flash to the proper bios which means you will need to install a 65nm chip to do so.
 
If you had checked the Gigabyte site, you would have seen that the E3110 is on their list of supported CPUs for the DS3L.
 
You must log in or register to reply here.
Back
Top