Disassembling Dell 2707WFP

[phptrix]

Hello,

I need some info on how to disassemble my 2707WFP. It has no visible screws and no notches I can see.
Any help would be greatly appreciated.

--
phptrix

 

[H-street]

you most likely have to "unhook" the bezel, most dells unclip the back plastic of the monitor from the bezel, not the bezel off the monitor

 

[10e]

As H-street says, just look for some slots around the bezel and back plate seam where there are clips inside. Usually a small screw driver will allow you to unhook those clips by applying a little pressure and separate the two, giving you access to the electronics inside.

Usually the clips go all the way around the bezel/backplate seam.

Good luck!