DFI for n00sb?

Joined
Apr 24, 2005
Messages
13
Hey everyone!

Well I'm stuck between the Lanparty nf4 sli or the a8n preimium. Just found out about DFI so I was on a mission learn. I noticed that Lanparty is an OCer's dream. Well heres me question:

Is it for n00bs? I don't plan on OCing anytime soon. I just want a killer gaming machine. Will it just work out of the box? I was reading dfi-street and it seems to be nothing but heavy tech articles. Lanparty seems really intresting, but I don't want to do much grunt work just to get my system to boot.

Any lanparty owners or anybody please fill me in
 
I have one. The SLI-DR. I thought it had a bad SATA problem, but it turns out my drive just spontaneously died between system builds (Hitachi, go figure.) It's an incredibly stable board full of features. It's also rock solid for OC'ing. Even a chip with an 8x multi (if it ever exists, a Sempron is likely for 939 soon,) wouldn't have trouble finding it's clockspeed limit.
http://valid.x86-secret.com/show_oc.php?id=27056

450 HTT should be high enough for most people, heh.

As far as "for noobs," I really don't quite get the misconception. Just because it has a lot of settings in the bios doesnt mean that you're required to mess with them blindly. It has all the same settings as other boards, except more.

If you don't go DFI, then MSI is the next best. ASUS can't make an AMD64 board to save their life, in my experience. They should just keep with P4 boards, heh.
 
Sorry for the misconception. :cool: I was reading on dfi-street that DFIs were not for n00bs. That even if you just want to keep it "stock" you'll have to tweak the bios settings for memory to work and other things. I can't find the post right now, I'll keep searching if anybody wants it.

But I was just wanted to read about people's experience with DFI straight out of the box. Was there any tweaking involved to get it to work?
 
radioact1ve said:
Sorry for the misconception. :cool: I was reading on dfi-street that DFIs were not for n00bs. That even if you just want to keep it "stock" you'll have to tweak the bios settings for memory to work and other things. I can't find the post right now, I'll keep searching if anybody wants it.

But I was just wanted to read about people's experience with DFI straight out of the box. Was there any tweaking involved to get it to work?

Yeah, I had some issues tightening a screw in a standoff, but it was because I was coming in from the wrong angle. Other than that, it works just fine.
 
radioact1ve said:
Sorry for the misconception. :cool: I was reading on dfi-street that DFIs were not for n00bs. That even if you just want to keep it "stock" you'll have to tweak the bios settings for memory to work and other things. I can't find the post right now, I'll keep searching if anybody wants it.

But I was just wanted to read about people's experience with DFI straight out of the box. Was there any tweaking involved to get it to work?

No, and I went about as far away from dfi-street's 'recommendation' as you can get. I *did* get a native 24-pin PSU but I also got 'value' RAM which they say is a no-no. 2x1Gb Corsair Value Select.

Plus, I am a n00b. (Hi, I'm egg and I own a DFI.) When you hit the power, the first thing the display shows is GPU info. I saw '256Mb' and thought the board was only seeing an eighth of my RAM. Reboot, bios flash, tweak, tweak, reboot.... Fuck, same thing. Repeat. I figured it out eventually. :rolleyes:

Wound up flashing the BIOS and made zero changes... all is well. 3-3-8-3 (3-3-3-8) 1T timing on the RAM.
 
Dam see things like that sound intimidating. Thanks for the info eeg! Thats the kind of stuff Im looking for.

I think this is doing more harm than good. The more I hear of stories that go wrong or something, the more I want to get a lanparty. But I don't want to spend $$ on a mobo Im going to f'up. I dont know what to do! I just want a nice stable machine for gaming. *sigh*
 
yea--DFI streeters had the nerve to tell me a DFI-lanparty ultra D won't even boot with a 20-24 pin converter-- then started spoutin all kinds of PSU specs that were off the wall--

i told um--geez--all the other nf4s can work with a converter--the somehow supposedly superior DFi can't ?--LOL

my DFi has been running strong with a 24pin converter and a asus 450sl psu

just for a joke --i pulled the converter off and just plugged in the 20pin ATX--a definate No-no

well the machine just booted up fine-- i didn't run it more than 10min though --then put the converter back in--

i'm running some chepo inferion type ram----and the computer overclocks like a champ--even with the ram set to --AUTO --but you do have to set the ram dividers--but it isn't much of a problem.-- only thing about this MB is you'll want to flash the bios --i'm running 618-03 but there are some 7series out now--just check um out over at rebels haven--and they got the change notes for the type of ram your running--

as far as a noobie--getting this MB--wellDFI street would have you believe it is some kind of super complicated--super overclocker--that just having one makes you a instant super-geek.

but the truth is the DFI-lanparty ultra D --is a great MB--it is not much more tweekey than any other nf4MB when the bios is updated--

it is more of a factory built modded MB for overclocking .

the only thing about this MB that can be a problem for the novice or the so-called pro alike-is the v-dimm and v-core can pushed up so high above the normal--that you can kill stuff like the ram or the cpu if you not careful. keep the voltages to the less insane side and --there shouldn't be a problem.
 
"DFI street would have you believe it is some kind of super complicated--super overclocker--that just having one makes you a instant super-geek."

Yeah. Thats the exact feeling I was getting while going through the street. Like I said b4 that stuff is very intimidating. Thanks JSF35rhino. So as long as I play it safe AND research my ram options, I should be OK.
 
if you can flash a bios with a award flasher. and get a decent psu like an antec--

and use restraint with the voltage for v-core and v-dimm and so such.

i don't see why a newish computer builder can't build a DFI-lanparty ultra d , the instructions that come with it are a bit difficult--but i haven't seen many instruction books --besides from asus or abit --that ever were very helpful.--but there is enough it the book to build the computer-- although it is not very clear on what setting such and such will do -

with the right bios update you can just about leasve the ram settings on auto if you want--


afterall--DFI made OEM's for years . the lanparty ultra d is not the easyest MB out there--but it is not as difficult as some would claim --it is sort of a cult MB--you got to be in the club--or something--lol-- it is the best overclocker i know of--but this fanatic cult deal--about a computer component maker ?--thats just weird !--LOL :eek:
 
radioact1ve said:
Dam see things like that sound intimidating. Thanks for the info eeg! Thats the kind of stuff Im looking for.

I think this is doing more harm than good. The more I hear of stories that go wrong or something, the more I want to get a lanparty. But I don't want to spend $$ on a mobo Im going to f'up. I dont know what to do! I just want a nice stable machine for gaming. *sigh*

It wasn't that bad, I'm just new to the PC building process. Took me a good 3-4 hours just to install the hardware. I deliberately took my time but a lot of that was my n00b shining through.

I think on dfi-street you hear the problems (which are always prominent if not numerous) and then you hear a little bit of elitism from the two support people over there. YMMV of course, it's possible that certain RAM will cause problems; I remember seeing references to any 'value' RAM and TCCD, but then again it's worked well for me and everything has been stable.
 
well--the first batch of these DFI that i got --did have some problems. but they were "problem-prone " out of the box . this was due to poor QC . anybody noob or pro gonna have some issues with a poor QC on a motherboard .

anytime you see a company blame value ram--PSU's plug in adaptors and anything else thay can think of --to me it looks like they are trying to dodge a few million RMA's. what about the other brands of NF4's that seem to run the same stuff with few problems? the specs for NF4mb were all set standard--wern't they ?

i got some of these MB when they first came out --now DFI-street telles me that what the book says is wrong you have to have such ram/psu ect that are way beyond what was origionally called for ? i don't recall ASUS ever contridcting themselfs in such a way--.

sounds like a load of bull to me-- changeing the rules after the game has been played--lol

the last batch of DFI's i got were very good quality and super stable and would run and even overclock with value ram and a 24pin atx adaptor provided you have a good PSU to start with.

the DFI natzis with their overzelous and fanitic defense of DFI --the sicko-" DFI is allways right and can do no wrong" attitude -- has kinda hurt DFI's sales.

i've been building computers since the old k6/p2 days -- i have built systems on nearly every brand of MB out there. i remember DFI's first MB's well-- and they were nothing special--kind of like ECS more than like an asus or abit.

in DFI defense--i've seen every MB maker--from time to time --make a few bad MB's-- when your trying to kick thousands of these things out the door every week --there are bound to be a few bad ones in the bunch.

the diffrence is in how the MB maker handles the problems --the few RMA's i've had to make with the DFI's they did OK. but it could have went with a few less hassles.

for support you don't need to rely on a fan-base-- you need professional people who know that sometimes in spite of the best intentions --a problamatic MB will get out there .

some of the contradictory stuff i kep hearing comming from DFI-street though--makes me wonder why i ever got the DFI's to begin with. however the MB istelf has been pretty good--lol
 
Thanks this thread is reasurring to me too, my DFI is in the mail right now and I have never messed with anything better than an old P3.

Radioactive, if you do run into a problem just come on the forums and somone will usually respond in 10 minutes with a solution. :)
 
Just to flavour the evaluation of the DFI boards, last summer I spent 40+ hours trying to navigate a "cold boot error," which in fact wasn't the cold boot error that every DFI owner was telling us that we had. I've NEVER had a problem with ASUS boards, and most people find that they work without a problem. Even people who are pro DFI are willing to admit that the boards can be a little bit more finicky about the parts that go into it, and while sometimes they're dead wrong, you often can never be certain. I stuck with ASUS when I picked up my mobo, and haven't had a single problem with it, and heartily recommend any ASUS mobo from the current generation.
 
I just feel that DFI rushed them to market and didnt do as much testing as they should. They are now starting to get back on track but they blew it in my opinion. I mean...4 power inputs?? Most manage with two. Kludge!

As mentioned earlier, how can you class 80% of the worlds DDR ram and PSU's as inferior and unsuitable when they run fine in pretty much any other motherboard?

I'd probably go back to Asus next time.

As for a beginner building one. Well there are an awful lot of folks that just dont read instructions or are just plain dumb when it comes to building stuff. We all make mistakes but as long as you take your time and think things through you should be fine.
 
well--my a8n-sli delux had a cold boot problem--my dfi ultra D had a clear cmos issue when power off--

plus the dfi has a problem with some kinds of ram-- however--all these things were cured through a bios upgrade--

so far i haven't seen a nf4 MB come out of the box perfect, any brand .--and i haven't seen one yet that didn't require a bios flash right off the bat either..

as far back as i can remember--just about every type of new chipset i have seen--intel, AMD. nvidia. via .sis or ali-- had some issues that required some effort on the part of the builder to get right-- even a mature chipset--like a intel 875p-- get a new MB--bet it will have a old bios on it and need a upgrade--lol

if you got an unstable DFI--and it has the late bios on it--(618 or above) and you know all the other parts are good--you need to RMA --when these MB's are right they just don't have these finikey little problems . you just got a bad mb-- in spite of what DFI street says--
 
Thanks for the replies everyone!

Wow I guess I was a lucky one. I don't remember mentioning this but this is going to be my 2nd build. To tell the truth, my first one was OK. Thing is I didn't read ANYTHING. I just made a list of what I wanted to buy, basically just brand name (AMD, nvidia) and cheap stuff (I don't know what kind of mobo or ram I have!!) Thing is everything worked. And I haven't had a problem yet. I built it in the summer of 10th grade. Im going to be a sophomore in college now.

Now, for my 2nd one, I have been reading ALOT! 3 weeks worth at least. I have time to kill b4 my $$ money gets here. After reading so much, I learned alot. Just surprised at how many things can go wrong and it didn't happen to me *knock on wood*. Regard less, I have learned and to tell the truth, it was a tie between Asus and DFI. Didn't know which way to go. Anyway, I just wanted to mention what kind of exp. I have. :D

Lately though I have been shifting back to Asus. I'll just keep reading.

On a side note, what's the future like? Is there a motherboard thats coming up getting people excited? Just wondering b4 I buy a board that came out in feb. I think. During my reading I learned about the new BTX standard. Any point in waiting?
 
If we all waited....no one would buy anything. :)

There will always be something new round the corner. Draw your line in the sand, buy the gear and get gaming or whatever it is you want to do. ;)
 
Well AMD will be switching to the socket M2, that will be like next year this time. And I think BTX wont kill ATX.

And you cannt keep thinking about whats next becasue there is always something better on the horizon, if you have to make a stand and say I am upgraded now and fuck what comes out in 2 months and be happy with what you get :)
 
BTX is a dog--like DDR2

the next big move will be DDR 3 --don't know if it will be BTX-- with AMD i will guess it will still be ATX.

amd could have ran DDR2--but decided to stick to DDR and not change the memory untill there was a DDR3 standard .

the truth is a NF4 is pretty well developed and should have several years of life in it. if you wait untill the new socket/DDR3 new CPU is here-- thats a long wait--and being a new cpu /socket/chipset and god-knows what else-- how buggy do you think it is going to be ?

and lastly how expensive will it come out at ?

so a new socket is a year away--or more if there are delays--it will come out super expensive and super buggy and to top it off-- might not be revolutionary--most likely evoloutionary --and not much faster than the old socket 939-- if you wait untill most of the new bugs are fixxed--and wait some more while the price drops--you'r looking at three years--lol

a 939 system should be good for a while :cool:
 
2006 brings DDR2 for AMD, 2007 brings DDR3 so goes the word.

DFI runs on a 20-pin just fine. I've done it on a Fortron 530, which is not only 20-pin, but only has +12V@18A. I don't think many of the people at DFI Street know much about electronics, and they just spout random crap.
 
dandragonrage said:
2006 brings DDR2 for AMD, 2007 brings DDR3 so goes the word.

DFI runs on a 20-pin just fine. I've done it on a Fortron 530, which is not only 20-pin, but only has +12V@18A. I don't think many of the people at DFI Street know much about electronics, and they just spout random crap.

What are you talking about? The kids on DFI Street are totally 31337! :p

Regarding DDR2 and AMD - while I think that it's likely that AMD will shift to it (they've talked about it to some tech reporters, but haven't offered anything definitive) there's really no way to be certain. The OP, assuming that they can afford to, and want to, should purchase a computer now, and not worry about what's coming down the line. There is always new stuff coming, and it's pointless to hold off until that next thing has been released.
 
DamienThorn said:
What are you talking about? The kids on DFI Street are totally 31337! :p
:D

On waiting for the new thing, no way I'm waiting 3 years!! I was thinking more about fall this year when I get my cash. Holiday season is usually when good stuff comes out. Bah doesn't matter. The good stuff is out right now and I don't plan to be a beta tester when new things come out.

Everyone is right. If you wait, you'll wait forever. New things are always coming out. It's just me being paranoid. Thanks everyone!!
 
Well I remember the fanfare we had when we switched from 133Mhz SDRAM to 2100 DDR. It was hailed as the best thing since sliced bread but in actual fact it was only just faster than a decent SDRAM setup.

Its rare you get a real quantum leap so dont sweat it. Plenty of folks still out there with PII's, TNT M64's, Win98 and Office97. :)
 
Back
Top