DFI Customer Service...

Unknown-One

[H]F Junkie
Joined
Mar 5, 2005
Messages
8,909
I generally hear good things about DFI's products and customer service, but they're certainly managing to irk me the wrong way.

Purchased a DFI motherboard (LP DK 790FXB-M2RSH), attempted to flash the BIOS, motherboard failed to POST after the flash. So far, not a big deal, BIOS flashes go wrong from time to time. I set up a cross-shipped RMA and had the replacement here within a week.

Unboxed the replacement today, and I instantly knew something was wrong. They had sent me a LP DK 790FXB-M2RS instead of a LP DK 790FXB-M2RSH. The two motherboards are nearly identical, so I bit my lip and decided to give it a go anyway... The first PCIe 16x slot on the replacement is dead.

So I now have two defective motherboards, and I'm out $380 ($190 for the initial purchase and another $190 deposit for cross-shipping, which will be refunded when they get my first bad board). DFI's offices aren't open on friday, so I now have to wait until monday to get a response back from them.

This is absolutely ridiculous...
 
That sucks. Hopefully DFI will make good on it for you somehow with some extra compensation.
 
DFI RMA is a joke. I went through over 6 months of RMA hell and of the 2 replacements I got during that period (yeah, it took 6 months to get 2 boards) was a motherboard with a crushed northbridge and a board with dead RAM slots.

DFI tried accusing me of both the crushed northbridge on the first board and frying the ram slots on the second board.

I had to go over the RMA supervisor's head and talk to the DFI support manager who also wouldn't help me. They wanted to send me a THIRD board but not until I shipped back the second bad board (at my expense just like the first bad replacement board) but I refused and demanded my money back.

For some reason he told me I had to contact the company I got it from (mind you the 15 day return period had LONG past) and wouldn't budge on it. So I contacted eWiz (the site I bought it from) and they were completely confused as to why DFI was telling me that I had to get my money from them and they again referred me back to DFI.

To make a long story short (or to stop a long story from getting even longer), 6 months, 2 bad replacements, a Better Business Bureau complaint, and going over the Support Manager's head to and contacting (more like further arguing) the Head of DFI Operations in North America... I FINALLY got a check made out to me for the original purchase price plus all the shipping I paid in sending back those defective boards.

I still have to send back the 2nd board actually, but their 6 month wait isn't up yet (it's only fair since they screwed with me for that long.)

I hear that since then, DFI RMA has gotten worse, to the point that they'll look for any reason to deny RMA including looking over areas that have no relation to the problem you're reporting.

The only other DFI board I've had since then was second hand, and just given to me (and even then it has problems). Never again will I support DFI. Sure, they have some good overclocking boards that are fantastic (when they work), but when they don't work it's hell getting them to honor their warranty.

So I wish you luck. You'll need it.
 
i've had about 10 different DFI Intel boards and using their high end X58 right now, never had a problem with any of them *knocks wood*

that is weird you had so much trouble, from what i've seen with other peoples experiences, they're usually very good.
 
As far as I'm concerned, I gave them a $190 deposit for a replacement LP DK 790FXB-M2RSH, I have yet to receive my replacement LP DK 790FXB-M2RSH. If they refuse to deliver it, they have effectively stolen $190 from me, and I'll be forced to take my complaint to the Better Business Bureau as Dark79 suggested.

Damn it, I knew I should have just claimed "DOA" and RMAed it through newegg. Now DFI has my money and there's nothing I can do about it.
 
As far as I'm concerned, I gave them a $190 deposit for a replacement LP DK 790FXB-M2RSH, I have yet to receive my replacement LP DK 790FXB-M2RSH. If they refuse to deliver it, they have effectively stolen $190 from me, and I'll be forced to take my complaint to the Better Business Bureau as Dark79 suggested.

Damn it, I knew I should have just claimed "DOA" and RMAed it through newegg. Now DFI has my money and there's nothing I can do about it.

I can give you the e-mails of who I had to deal with if you like. But after dealing with me they probably quit =) Oh, and I'll give them to you on the condition that you mention me by name. I'd like them to know I'm making good on my promise to spread the word on how awful their support is.

I forgot that I even had to go so far as to make a youtube video to send them a link prove that one of the RAM slots was dead.

I'd contact Newegg anyway and ask for a supervisor (the fist person you get on the phone will most likely be a scrub who won't help you anyway). Explain the situation and see what they can do for you. Make sure you let them know that you'll do a chargeback if you have to which you should be in the right to do if DFI won't honor their warranty. You can also request the chargeback on that second $190.

For the record I've had 4 DFI boards. A CFX3200 that had the infamous ULi stutter, a RS482 matx which is still going strong (the only one of the 4 that kept working), a P965-S that had the SATA ports die, and a X38-T2R that that has recently developed cold boot issues and won't wake from standby.
 
When I had a BIOS flash go wrong, I popped my CMOS chip out, mailed it to them, they flashed it for me, and sent it back....
 
I can give you the e-mails of who I had to deal with if you like. But after dealing with me they probably quit =) Oh, and I'll give them to you on the condition that you mention me by name. I'd like them to know I'm making good on my promise to spread the word on how awful their support is.

I forgot that I even had to go so far as to make a youtube video to send them a link prove that one of the RAM slots was dead.

I'd contact Newegg anyway and ask for a supervisor (the fist person you get on the phone will most likely be a scrub who won't help you anyway). Explain the situation and see what they can do for you. Make sure you let them know that you'll do a chargeback if you have to which you should be in the right to do if DFI won't honor their warranty. You can also request the chargeback on that second $190.

For the record I've had 4 DFI boards. A CFX3200 that had the infamous ULi stutter, a RS482 matx which is still going strong (the only one of the 4 that kept working), a P965-S that had the SATA ports die, and a X38-T2R that that has recently developed cold boot issues and won't wake from standby.
I'm going to wait to hear a response back from their RMA department on Monday before doing anything drastic, but I would appreciate any names or other types of information you can give me. Hope for the best, prepare for the worst.

When I had a BIOS flash go wrong, I popped my CMOS chip out, mailed it to them, they flashed it for me, and sent it back....
BIOS chip on this motherboard is soldered on.
 
I was going to buy a DFI board this time around (currently use an n4 ultra with my opty 148), but then I read that dfi-street is gone, and I went, pfft, that place was just about the only reason to buy one imo. Now, all I hear is how bad their customer support is :(

Goodluck to you on the rma process, hopefully you will get the right board this time :(
 
Well, I shot off an email to their RMA department asking for the correct motherboard to be shipped out as soon as humanly possible on Monday, and a prepaid shipping label to send the wrong/defective replacement back. I asked for a prepaid label for the original bricked board as well, due to the inconvenience.

I also let them know how dissatisfied I was with their service, and reiterated how I had made them aware of the hurry I was in to get this resolved. This is not the way to treat someone after handing over a $190 deposit to hurry the process along...
 
Got a call back from DFI, they're paying to have the 2nd defective board shipped back to them. When they get it, they'll refund me the $190 deposit.

That still leaves me with the first dead board, which I'll Rreturn newegg like I should have done in the first place. I think I'll get a Foxconn Destroyer this time...
 
Last edited:
yep, i had two bad experiences with DFI and i'll never buy from them again. Had the DFI nF4 Ultra that went dead after a few months, RMA'd it and switched to asus a8n-sli dlx. Then for my Intel build i decided to get the DFI P35 Dark. It too died after a few months and I RMA'd it. Then they said that I bent one of the pins on the cpu socket and thats why it broke. Sure. Anyway, I paid the $40 to get the pin fixed and as soon as I got it back I sold it and got the Asus P5Q Dlx. That's been doing strong ever since. What irks me more was how rude the mods could be on DFI street. And of course the endless excuses that DFI boards are for tweakers and that's why the boards are picky with psu's, needing the floppy power, certain memory, blah blah blah.

now that is just my experience with those two mobo makers. for me the DFI's didn't work out in the end, and the ASUS boards have been stable for me. i'm sure others have had good and bad experiences with either one of those manufacturers.
 
Last edited:
I was going to buy a DFI board this time around (currently use an n4 ultra with my opty 148), but then I read that dfi-street is gone, and I went, pfft, that place was just about the only reason to buy one imo. Now, all I hear is how bad their customer support is :(

Goodluck to you on the rma process, hopefully you will get the right board this time :(

dfi street is up under a different name. well, a user based support forum is up, that is.

http://www.csd.dficlub.org/forum/index.php?
 
dfi street is up under a different name. well, a user based support forum is up, that is.

http://www.csd.dficlub.org/forum/index.php?

The current support forum is not DFI-Street. Doesn't even come close. But if you have a DFI motherboard and you want online support, I guess DFIClub is....there. That is if by "support" you mean being told "all your problems are your fault." At least it's consistent with the RMA support team haha =)
 
thats pretty much the only response i ever got from dfi street. and when i questioned how a doa board could possibly be "user error", i was banned. so when i saw that the same morons were involved with dfi club, i started using xs or crunk.org for any support i needed. just putting it out there that there was still a "user based" support forum.
 
Man, I just can't catch a break...

Got my Foxconn Destroyer installed, and I'm only now just finding out about some issues the board has. My USB wifi adapter likes to reset randomly (Windows plays the "unplugged hardware" sound and the device disappears for a moment), you can't adjust the NB multi due to a BIOS bug that was never fixed, and your overclock resets to stock speed when you resume from S3 sleep mode.

I would complain on their official support forums, but they're hosted by Extreme Systems, which is currently down again.
 
have you tried asus boards or even gigabyte or msi? i tried a dfi board once......ill never use them again. the three i mentioned above are top of my list at least. i know every brand has a bad apple or two.......or uh three. i research every board i look into no matter what brand. if i see lots of problems im not likely to buy it. if i were you i would do the same.
 
have you tried asus boards or even gigabyte or msi? i tried a dfi board once......ill never use them again. the three i mentioned above are top of my list at least. i know every brand has a bad apple or two.......or uh three. i research every board i look into no matter what brand. if i see lots of problems im not likely to buy it. if i were you i would do the same.

Stay away from MSI, my recent MSI RMA story trumps and one of these DFI stories. Just try and get ahold of someone from MSI, they don't even read their emails.

For the record, I don't think that any manufacturer covers a board bricked by a bad flash. Why and how did you flash?
 
Rule #1

Hardware is not 100% always gonna work, 100% of the time, I don't care who makes it, on what day etc etc. If the mfg refuses that, or you use that as a reason to "avoid a product" consider yourself and themselves both unlucky.

I had 1 flaky board in my day, an Asus. Doesn't mean I wouldn't buy another one, as they say shit happens.

The RMA issue though, ick, that'd make me wanna cut myself for sure, no matter who the mfg is, they should man up and fix it. If they can't fix it, agree to meet in the middle and go seperate ways.

When Abit got its "brains" taken by DFI, they were synonymous with excellent OC boards. My next board will be a DFI, and I don't fear it one bit. Nor would I hold Asus feet to the fire if I found a board from them I liked, yes, while past experiences should influence future ones, you can't always sit on that thought, things change, companies change, hell, look at Gainward, talk about a company that went from " DA BOMB, to just plain EXPLODES ON CONTACT, IN YER FACE "
 
the dfi board i got should of never have left the warehouse the bios was so bad. i know some dont mind messing with there boards to get them working i on the other hand dont. every board ok almost every board should come from the warehouse with a stable bios so it could at least post.
 
i have had a shitload of dfi boards, since nf2 infinity. the quality is as good, or better than any other brand. the fact that they are known as "overclockers boards" and happen to have some extra bios options seems to frighten some users. their rma process is about the same as any other brand, maybe except evga. as an aside, the quality of pc hardware, or the qa process, has become much better. i havent had to rma a part in several years. and i go thru lots of parts. if you take a little more care in handling your stuff, ie ground yourself, be gentle, dont swap parts/ram while your pc is plugged in, etc, etc, you will be using your warrantys much less.
 
Back
Top