CPU Fan Error!

[Zer0Cool]

Just finished installing my new system.

I am having an error msg saying "CPU Fan Error! Press F1 to Resume"

I have fan controller installed that is connected to the 3 top of my fans and the 4th controls the CPU fan (Ultra Kaze 2000). The remaining 3 fans I have connected to the motherboard. According to the manual I have fans B, C, E occupied (A, D is not used, D is the CPU 4 pin fan if that helps).

All of my fans are working... cant place my finger on this error... plz help.

MOBO = P6T V2 Deluxe

Thanks

 

[gwarren007]

Do you have a fan hooked to the Cpu fan header on the mobo?

 

[Zer0Cool]

NO I dont, I have the CPU fan controlled by my fan controller.

 

[gwarren007]

Your must put a fan on that header OR go into the bios and where it says to halt on errors, switch it to "do not halt on errors" or something similar


Looking at the manual, go into the bios and click on the power tab. Select CPU fann speed and set it to ignored, that should fix it.

 

[Zer0Cool]

"Select CPU fann speed and set it to ignored, that should fix it."

That fixed it! Thanks.

 

[engiNURD]

... Looking at the manual, go into the bios and click on the power tab. ...

Your BIOS lets you mouse click?!?!?

 

[jeremyshaw]

Your BIOS lets you mouse click?!?!?

Don't laugh, some VIA BIOS (laptops) DO have that functionality!

 

[engiNURD]

Don't laugh, some VIA BIOS (laptops) DO have that functionality!

There was no laugh... there was an eyepop smiley, and a tongue stickout smiley.