Corsair Value Select 1GB Module

Rixx

n00b
Joined
Sep 16, 2005
Messages
30
Hi all,

I hope that I can be enlightened by they guys here. Im not too knowledgable about memory and would really appreciate some insight!

Im currently in the process of choosing a new motherboard for an AMD system upgrade and I currently have:

Corsair 184-Pin Dimm 1GB Memory Module : Model - VS1GB400C3

Is anyone aware of compatability issues with this ram and specific motherboards? Also, if this RAM is oki or is just naff! lol. Also, whether this would be compatable with the DFI LanParty UT NF4 Ultra-D Motherboard.

I had only moments ago, decided to go for the ASUS A8N-SLI Premium motherboard to be honest! But I wanted to put an Opteron 1xx series chip in it then overclock it. Does anyone know if this is possible and if this RAM would be oki for me?

Thanks for any views that are contributed!


Ricky
 
Ultimately a pair of Corsair value ram 512 sticks will be way more over clockable. 1 GIG sticks are way to fussy and don’t buy you much. Also, it appears you’re buying a dual channel board so again I’d suggest a pair of 512 sticks
 
BillR said:
Ultimately a pair of Corsair value ram 512 sticks will be way more over clockable. 1 GIG sticks are way to fussy and don’t buy you much. Also, it appears you’re buying a dual channel board so again I’d suggest a pair of 512 sticks

I doubt that really, I own both and both are about the same for OCing; neither can OC at all barely but both run fine at 2.5-3-3-8 1t @ 200mhz. I'd get the 1 gig stick now save up and get another gig of it later. We're at a point now where 2 gigs of ram is starting to become standard, better to have the added slot for dual channel than to get 512x2 ram only to have to upgrade to another gig in a few months. As for compatability, low rated corsair and crucial ram will most likely be much more compatible with any type of motherboard than higher rated fancy ocing ram like OCZ. You have nothing to worry about in that regard.
 
(cf)Eclipse said:
look carefully ;)


Rofl, missed it completely. I hope you worked a good commission structure with them, or at least some free product.

Hey, doesn’t that make you some kind of “HO”? ;) :D
 
Ditto the point that Corsair Value Select isn't very overclockable. Maybe 10mhz if you're lucky. The Crucial is kind of a mixed bag in terms of the 1GB value. There are 3 different types of it floating around that OC differently. Mine is the Samsung UCCC stuff. Doesn't OC the best, but it is probably more compatible with my mobo which is notorious for problems with the Ballistix.
 
kirbyrj said:
Ditto the point that Corsair Value Select isn't very overclockable. Maybe 10mhz if you're lucky. The Crucial is kind of a mixed bag in terms of the 1GB value. There are 3 different types of it floating around that OC differently. Mine is the Samsung UCCC stuff. Doesn't OC the best, but it is probably more compatible with my mobo which is notorious for problems with the Ballistix.


Corsair has actually said point blank they don’t recommend over clocking their value RAM, they even refused to submit it for testing in a value RAM test.

On the other hand I have some 512 sticks that do really well. Crucial value does seem a bit more consistent
 
sry to kinda hijack thread, but can someone point me to the thread that was like 2x1gb vs 4x512? cuz if you have a mobo w/ 4 ram slots, then thats a very reasonable thing to look at, since 2gb is becoming more and more common, but 2x512 > 1x1024, right? and if ur not going to get 2 gigs at once... well, yeah. ne1 know where that thread went? i thought it was stickied before. did it get deleted?
 
no, BBS likes keeping his forums clean. he replaced that sticky with mine, which actually links to the old sticky anyway. also, a quick search can't hurt anything ;)
edit: cause search went bad :confused:

for 2x512mb and 1x1024mb, it doesn't matter. if you have a s939 rig, definitly go for the 2x512mb, cause you need two sticks for dual channel
 
peacetilence said:
I doubt that really, I own both and both are about the same for OCing; neither can OC at all barely but both run fine at 2.5-3-3-8 1t @ 200mhz. I'd get the 1 gig stick now save up and get another gig of it later. We're at a point now where 2 gigs of ram is starting to become standard, better to have the added slot for dual channel than to get 512x2 ram only to have to upgrade to another gig in a few months. As for compatability, low rated corsair and crucial ram will most likely be much more compatible with any type of motherboard than higher rated fancy ocing ram like OCZ. You have nothing to worry about in that regard.

Don't the NF4 motherboards have 4dimms? Doesn't it mean he can get a 512x2 now and another later of the same kind?
 
Tsphere said:
Don't the NF4 motherboards have 4dimms? Doesn't it mean he can get a 512x2 now and another later of the same kind?
you obviously didn't read the link i just posted :D
 
cliffs? :D

i tried a search for the original thread, couldnt find it :(

from what i could see, my guess is that w/ 4 sticks the mobo will run the ram at a slower speed than w/ 2 sticks?
 
hm. it says for gaming, to do 4x512 if you can hit a decent clock w/ the ram. what if i'm gaming, but i'm not oc'ing? should i just go for 2x1024?
 
either way, 2x1024mb is easier.. and in most cases, better. at a given mhz, 2-2-2, 2T ~= 3-3-3, 1T
 
Back
Top