Converting this system building project into my first OCed system

Betrayer00GT

Limp Gawd
Joined
Feb 25, 2007
Messages
350
I have been building systems for myself and others since the late 90's, when my dad financed my first system. I have never put together an OCed setup for anyone (even myself) in all that time, however. I had a "celery" 300a back in the day, and I admit I tried it at 450, but mine wouldn't even post. Two of my friends had them running at 450, but I guess the OC gods just wouldn't smile for me back then. :D I guess that first experience contributed to my ongoing OC ambivalence.

Well, ambivalence is ongoing no longer. My roommate got Supreme Commander for his Alienware E6700-based system a couple days ago. That game is my new calling. :D

"The system that can handle this game with everything enabled has yet to be built." - GameSpot reviewer

Oh, it is so "on" now. lol


Backstory (Feel free to skip to "The Lowdown")

So, before Supreme Commander upset my OC sensibilities, I had started a new system project (with an eye for future-proofing and potential future overclocking, thank God). My trusty XP 2000+ system, from so long ago I don't even remember anymore, went down due to a hardware problem. It it had been able to do everything I wanted from it. HL2, Doom3 (barely on this one, but it did it), the various Dawn of War releases, plus all the productivity apps I use were all fine on this ancient chimera. I decided to rebuild it, but with a water cooling setup (for noise control, not performance).

So, back at the end of November, I decided to put a water cooling loop in it before fixing the hardware failure. I tore it apart and packed up the components. I then used my router, angle grinder, and Dremel to get a stealth WC install (using DangerDen blocks/rad and a small AC pump) into my old school, all-aluminum Cooler Master ATC-100 case.

The thing is, when I got to pricing the parts to fix the H/W failure (after the month and a half it took me to get through the case modding for the WC install), I found other parts of my budget (the WC setup and Mustang upgrade parts/labor) killed my ability to order any replacement parts for a while. This went on until a week ago, when a family member (who got sick of hearing me whine about not being able to play games on my Moto Q or employer issued laptop, and) made an offer out of the blue to pick up ~$1200 in parts, if I get them from Dell, should I be interested. :eek: I was.

So, Dell sucks as a motherboard supplier. They only sell (as far as I can tell) the DG965WH, and I have ordered it and a Core 2 Duo CPU. Other than motherboard selection, this Dell Accessories experience has been pretty good. Well, at least it was not as bad as I was expecting when that offer was first made.

Starting with such a horrible motherboard (for any kind of OC) is going to suck, but not too badly. It will take me a while to be able to replace it with an enthusiast board, but I guess I can just hang for a while at stock speeds. I do not want to try to OC anything immediately anyway. Even if I had the enthusiast board immediately, it could take me some time to get a new Lucite top for my Maze4 CPU block (I need a 775 top as it has a Socket-A ATM), and then change the tubing to work with any new motherboard's layout.

I actually haven't even decided I will configure the loop for this initial Intel board's layout when I don't need the extra cooling vs air at stock speeds. Also, since I will be switching to an enthusiast board later, do I want to have to potentially redo tubing with yet another MB layout? We'll see. It will come down to how loud the stock cooling is, I guess. Anyway, at least my Maze5 GPU block will work on an nVidia 7-series, and I even ordered the hardware for that, initially. Again though, regardless my WC loop status, any system on the Intel board will be left at its stock speed settings for a bit.

I have come here because "a bit" is not forever. In fact it is likely only until the start of Summer or even earlier. Also, because trying to post a 300a "celery" at 450 way-back-when does not provide me with enough knowledge to get this whole project done in an optimal manner, I need some input from those with more knowledge and experience. Thanks go out to Chris Taylor for the fact that I feel the need to OC for the first time, by the way. :cool:

The Lowdown (not the CliffsNotes :p)

So, for my project, I already have an E6600 retail box CPU, an "OCZ 2 GB PC2-8500 Dual Channel, Platinum XTC, NVIDIA SLI-Ready Edition" RAM kit, and a PNY 7950GT 512MB video card on the way at the moment. The CPU might even show up today. :D Anyway, this will all have to go into an Intel DG965WH overclocking nightmare until I am able to pick up an enthusiast board. I would think that will happen around the start of Summer.

Also, by the time I have the enthusiast board I will be running a water cooling loop for both the CPU and my video card. I have everything already, which includes a MAZE4 CPU waterblock, a MAZE5 GPU waterblock, a dual 120mm radiator, and a small AC pump. I need to get a MAZE4 Lucite top that will work on a 775 based CPU, but otherwise it is already complete.

Based on the Core 2 Duo overclocking database I found in a thread in the CPU forum here, I have set a 3.6GHz CPU OC with a 4-digit RAM speed as a long-term goal for my little project. Regardless of my goal, I am interested in making the right enthusiast MB selection to ensure I can get the best possible outcome (based on the actual OC capabilities of the CPU and RAM I receive). I was thinking eVGA 680i, but I'm not sure. To a lesser extent I am also interested in the ease of the OC experience for the board I select. I really want three x16 PCIe slots, too.

I can say I have a solid understanding of basic computer platform details, like the need for multipliers in the various interfaces among the CPU/NorthBridge RAM/NorthBridge, which busses are double vs quad pumped, and the realistic effects of changing RAM timings. I am an overall tech junkie (good for those of us in the IT industry, right?), and tend to read about these things, just not necessarily as they evolve. I am usually just a bit behind the latest-and-greatest on the tech curve for platform details.

Also, and possibly related, I am seeing references in threads around here that I don't understand. Like, for instance "800strap" in reference to FSB. Is that the same as saying "800 FSB", or is their a conceptual difference? There are others that I just don't understand the realistic effects of, such as internal motherboard latencies. Also, where can you get info such as how effectively different boards hide the little things like internal latencies so you can get the best possible OC outcome?

I do not like not understanding something I am interested in. I have only been interested in overclocking for the last couple days (since seeing Supreme Commander on my roommate's Alienware), but even though I have seen oodles of "overclocking guides", it has been impossible to find in-depth enough coverage to get explanations of just the OC minutiae I have already mentioned. I really like reading, and detail is a good thing. :D Not everyone agrees, apparently. :(

I guess my specific questions for the people here are:

1. Does my goal seem reasonable?
2. Based on the WC loop/CPU/RAM I have already selected, and excluding current unknowns like silicon quality/yield issues, what are the remaining issues that will determine my level of success? I am thinking they are all affected by motherboard selection, but I don't really know and that's why I'm asking.
3. Any suggested reading for some coverage of "OC minutiae"? My preference is too find information that covers the details of question 2, and also sources for how different boards stack up on relevant issues.
4. Is their an issue with the RAM I ordered that is contributing to the fact that I do not see it in the entries in the Core 2 Duo overclocking database I found in the CPU forum? Other than cost, that is.

I really appreciate any help you guys can toss my way to improve the quality of my newly started, ongoing overclocking education. I have searched and read stickies, I promise. :D If I missed anything in that regard, please just point me in the right direction. :cool:
 
Any decent enthusist MB you find in popular use will get to the speed you want, focus on your features.

After you leak test the WC setup, and mount it properly

Boot with defaults. go into bios and set your Vdimm voltage to whatever that memory is specified, disalbe cpu fan alarm, set cpu warning temp to 60C, reboot, install os, drivers, windows update and let it run for a couple of hours. download Coretemp and Orthos for temp monitoring and load testing and record your baseline temps at default at load and idle. Try it in 3d mode with a game to check the video card is happy. etc.

Boot, go into bios
turn off all temp/fan/cpu throttleing options.

set the FSB option for a 400MHz FSB.
set your memory divider to run the ram at 2:1 (800MHz)
manually set your memory timings to your rams spec.
raise cpu voltage to 1.375

Bets it reboots right to 3.6 ;) if not try 1.4V

now if you want you can see if it will still run with slightly less vcore. or you can start raiseing your FSB 5 MHz at a time and see where the cpu craps out.

i would return that video card and go with the 8800 go the the main web page of this site and look at the review.
 
Wow. That was excellent. Thanks!

I would be interested in getting a better RAM clock speed, but if that is as easy as you were able to make it sound, I might just run it that way for a bit. Assuming it does work, of course. ;)



As for an 8800, I need to get my gfx card from Dell Accessories, and while the 7950GT 512MB I ordered was $235 (and not on the site anymore since the day after I ordered it), the cheapest 8800 they have is a GTS 640 for $509. That is just more than I want to dedicate to the gfx card at the moment. Now, if they cancel the one I ordered because they were behind the ball on removing it from the site when it was no longer available or whatever, I will push for a discount for a selected replacemnt. That replacement would then be the 8800 GTS 640 they sell. It does not seem very likely that they would let me actually buy a card they did not carry at the time, however, regardless of how close to not carrying it they were when I ordered. We'll see.

FYI: DHL arrived with my MB and CPU before I finished typing this. :eek: :D :cool:
 
So, I will be installing the CPU/HSF into the MB, then the MB into the case's MB tray, tomorrow. First I will have to break down old faithful. It will be a sad affair. I might read it its last rights.

A bit off topic, but very interesting, is that after I installed the Gigabit switch and rearanged my network components a bit for the house Cat5e, I had my roommate test for Internet connectivity.

He got this out of our cablemodem:

[EDIT: I have bested that with this:]

wowfast.jpg



Notice the capital "B". Awesome.
 
OK, I take it back, Dell does actually suck pretty bad.

They canceled my PNY 7950GT 512MB because it turns out they can't get any more, then they moved out the estimated ship date for the OCZ PC2-8500 2GB kit another week and two days. The RAM wouldn't have shipped until 3/16. Either of these alone are unacceptable. Together they really make me mad.

So, canceled the OCZ RAM and started looking for RAM and video cards with a "usually ships in: 24 hours" filter on.

i would return that video card and go with the 8800 go the the main web page of this site and look at the review.

It's funny you said that, Bill. Apparently Dell and I both agree with you, now. :D The best options available for quick shipment turned out to be a pair of 512MB Kingston PC2-8500 sticks on the RAM front and (not 2GB, as I need to conserve a bit due to the increase in cost of) an XFX Geforce 8800 GTS 640MB for my graphics needs.

I ordered the RAM, but their financing dept has not yet given back the balance of the original (and now canceled) RAM and graphics card order, so there is not enough balance remaining to get the 8800GTS right now. I need to wait until sometime next week, which is when Dell Financial Services says they should finally give back the balance of the canceled items.

I had to speak to 12 different people over the course of several hours of calls/callbacks to finally figure out that last little tidbit of information. At least Dell Sales decided to credit the method of payment for $50 due to the "inconvenience" of having the graphics card canceled and the shipdate of the original RAM selection pushed back unacceptably far (beyond the return date of the MB and CPU). I should have everything by the end of this week. Maybe the beginning of next for the video card, however. I can use that time to get my VGA waterblock out of my cooling loop, however. It doesn't work with 8-series nVidia cards, unfortunately.
 
Everything has been here since 3/6, and I have had it up and running Windows 2000 for a while now, as I do not have a copy of XP ATM. I might go get one later today.

The thing is, my 8800GTS says the minimum +12V rail is 26Amps. My PS is only rated for 22A max. So, with the video card installed, if I hit the power button absolutely nothing happens. I was chasing around for quite some time trying to find what I desperately hoped was a short because of that. Eventually I RTFM for the video card and looked at that 26Amp rating with suspicion. That is how I figured out I need to run the onboard motherboard graphics until I get a better PS.

So, the replacement PS has been ordered from Newegg. It has a 42Amp +12v rail maximum rating, so I anticipate no problems once I get it in with the 8800GTS. That +12v rail rating is not bad for $110. It only has the one 12v rail, but I don't see that as an issue when that one rail has a max rating of 42Amps . It will still take a few more days for it to arrive, however.

Also, the MAZE4 CPU waterblock does not fit well on this board. I will stick to air cooling until I have a board the CPU block fits onto more easily. Oh well.
 
Back
Top