Brandon02TAWS6
n00b
- Joined
- Aug 6, 2003
- Messages
- 16
I'm having troubles getting my computer to see both of the cd drives that I have hooked up. To start with I had a CD-RW drive that had jumpers set to slave(forgot to look before installing) and was plugged into the master channel on the IDE cable. Computer never had an issue. Now I have added a DVD-RW drive. The first setup had the DVD jumpers set to master and the CD-RW set to slave. The DVD-RW drive was plugged into the master channel and the CD-RW was plugged into the slave channel. I booted up and the computer only saw the CD-RW drive. Tryed unhooking the CD-RW and leaving the DVD-RW on the master channel and the computer saw no drive at all. Tried plugging the DVD-RW into the slave channel and the computer saw it. Added the CD-RW on the master channel and only saw one drive (I forget which one it was now). Set both drives jumpers to cable select and had the DVD-RW on the master channel and CD-RW on the slave channel and only saw the CD-RW. Anyone know what could be the issue? I'm a little stumped with it. Thanks for the help.
Brandon.
Brandon.