Computer starting as soon as it gets power?

strossos

Limp Gawd
Joined
Sep 25, 2003
Messages
151
Just put together a new build with an asus k8vdeluxe se mobo, antec tru430, and a regular assortment of other parts. When I first tried booting up my computer the front reset and power switches were all connected to exactly what the manual said. The instant it got power the fans and everything started moving and it started booting. I then tried it again with all the front power and reset connectors disconnected from the mobo and the exact same thing happened.

Any ideas?
 
Sounds like some sort of problem with the mother board, because i was thinking it was the buttons on the front of the case then u said it turned on without the power button being pushed. Im not really sure what to tell u, did u try clearing the cmos im not sure if that will help but it may.
 
There a setting in the bios's power section which tells it either to stay off or switch back on after a power cut.
Yours is set to switch back on.
Just go into the bios a set it how you want.

Luck......... :D
 
Tigerbiten said:
There a setting in the bios's power section which tells it either to stay off or switch back on after a power cut.
Yours is set to switch back on.
Just go into the bios a set it how you want.

Luck......... :D


Phew, I just read something else that made me start thinking that that was the problem. It seems thats your idea also :p.

Well, I'm going to try it tommorow when I actually have it hooked up to a monitor and keyboard and everything, its 3 in the morning right now and I'm tired.. but I'll be able to sleep a bit easier. :D
 
Tigerbiten said:
There a setting in the bios's power section which tells it either to stay off or switch back on after a power cut.
Yours is set to switch back on.
Just go into the bios a set it how you want.

Luck......... :D

This should be what your "problem" is. Personally, this is how I have always setup my systems. Then again, I run mine 24/7 and want the system to come back on if the power goes out. Plus, I'm lazy and don't want to hit a second button to turn my system on after I'm done messing around with the guts. Just flip the switch on the back of the power supply back on and everything fires up.
 
Back
Top