Components needed to post?

makshim

Gawd
Joined
Jul 21, 2004
Messages
590
What are the components needed to POST? My friend has a mobo, CPU, and PSU, and his computer won't give any beeps and the fans won't spin, does he also need RAM, or any other component.
 
ram vid card are needed to pass the POST but the fans should spin anyway so you gotta make sure that the power button is connected to the right header...
 
  • Motherboard sat on a nice piece of cardboard,
  • CPU and heatsink (the heatsink is very important - if you're inexperienced enough to ask if the system needs RAM installed to boot, then this needs to be spelled out. The heatsink will need to be installed correctly and its fan will need to be plugged into the correct header on the motherboard or it likely won't POST, or maybe even kill the CPU if it does)
  • One stick of RAM
  • PSU
  • A video card and monitor if you want to see the lovely A:> prompt.

A screwdriver to short the power switch header will suffice to turn the thing on.

/edit
 
dylman said:
  • Motherboard sat on a nice piece of cardboard,
  • CPU and heatsink (the heatsink is very important - if you're inexperienced enough to ask if the system needs RAM installed to boot, then this needs to be spelled out. The heatsink will need to be installed correctly and it's fan will need to be plugged into the correct header on the motherboard or it likely won't POST, or rapidly kill the CPU if it does)
  • One stick of RAM
  • PSU
  • A video card and monitor if you want to see the lovely A:> prompt.

A screwdriver to short the power switch header will suffice to turn the thing on.
...all that, and some MoBo's are fussy about being booted w/o a keyboard. A floppy is nice so you can actually boot an OS (to run Memtest86+, drive tests, etc.).

B.B.S.
 
AHAHAHAHA we were so dumb! It's been so long since my build that I forgot the obvious....Twin was right... we didn't plug in the power button! LMAO! We were turning on the PSU.... but not the rest. LMAO, thanks guys :D
 
Back
Top