Well I was swapping cases when this happened. I have swapped out every part I can think of, memory, cpu, video, psu, psu fan. I have left only the basic parts in video and mem. I get the same result the comp starts for about 4 secs then shuts off. I reset CMOS taking batt out and putting back in. No matter what part I swap in and out same results. I have the board on a piece of wood. I was able to get it to POST once but only once. I'm figurin the board is done, I just want to be sure. Asus M2N-SLI. Thanks for any input.
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Comp wont POST
- Thread starter rgraze911
- Start date
Well, I let the comp sit for a day w/o the bios batt. I put it back in and what do you know it posted. So I was feelin good till I plug my SATA hdd in and got the same result w/ fans run for a few then shut off. I then take my hdd and put it in my test bed and no problems. Tried to boot the m2n w/o anything again, wont post. What a goofy problem.
Sounds like the SATA controller is on the fritz. Maybe?
I had this issue with my motherboard. It randomly stopped working and for some reason I disconnected my dvd drive and it started working. Plugged it in a different sata port and all has been well.