Hello!
I recently finished two mods, CURV3D and F4DE, one scratchbuild and one casemod. So now Im going to work on a older scratchbuild that I want to upgrade and also fix the small mistakes I did before. And I want to share this build at this forum!
This time I will also add a custom watercooling loop and other goodies.
EKWB! Thank you for helping me.
Be Quiet sponsored me with a Shadow Rock 2.
Gigabyte sponsored me with a GA-F2A88XN-WIFI.
MNPCTech sponsored me with this fan grill to have in the front, should look awesome!
Clear Acrylic 120mm Overkill "Nautilus" PC Fan Grill from Mnpctech.com
Well lets start by some pictures of the parts of the case that I have to work with right now.
It consists of the parts, the frontpanel, the sides and the backpanel. All together it creates a nice shaped case.
As you see the acrylic is kind of rough, many scratches. So I will start working on that. The acrylic part didnt really fit perfect either as seen on this picture:
So I measured out and cut 4-5mm so it fits better!
I will install the motherboard on the right side of the acrylic, and because I dont want to show the backside of the motherboard through the acrylic I gave it some black paint!
Im currently planning on what kind of hardware and other stuff I will use in this project. The next thing I will do is to cut out a hole in the backpanel for the powersupply and start working on a shroud over the bottom part of the case.
Thank you for checking in! Please leave a comment.
With king regards
Johan Nyman
Minimalistic PC's
I recently finished two mods, CURV3D and F4DE, one scratchbuild and one casemod. So now Im going to work on a older scratchbuild that I want to upgrade and also fix the small mistakes I did before. And I want to share this build at this forum!
This time I will also add a custom watercooling loop and other goodies.
EKWB! Thank you for helping me.
Be Quiet sponsored me with a Shadow Rock 2.
Gigabyte sponsored me with a GA-F2A88XN-WIFI.
MNPCTech sponsored me with this fan grill to have in the front, should look awesome!
Clear Acrylic 120mm Overkill "Nautilus" PC Fan Grill from Mnpctech.com
Well lets start by some pictures of the parts of the case that I have to work with right now.
It consists of the parts, the frontpanel, the sides and the backpanel. All together it creates a nice shaped case.
As you see the acrylic is kind of rough, many scratches. So I will start working on that. The acrylic part didnt really fit perfect either as seen on this picture:
So I measured out and cut 4-5mm so it fits better!
I will install the motherboard on the right side of the acrylic, and because I dont want to show the backside of the motherboard through the acrylic I gave it some black paint!
Im currently planning on what kind of hardware and other stuff I will use in this project. The next thing I will do is to cut out a hole in the backpanel for the powersupply and start working on a shroud over the bottom part of the case.
Thank you for checking in! Please leave a comment.
With king regards
Johan Nyman
Minimalistic PC's
Last edited: