tehandydumke
Limp Gawd
- Joined
- Feb 6, 2004
- Messages
- 255
A person told me I had to reflash the BIOS, is that true?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Originally posted by PurduEE
You might have a coin-cell battery that is no longer providing enough juice to keep your CMOS pages from corrupting.. I'd pull the coin cell out and go get another one (probably a CR2032). In addition, make sure that the CMOS jumper is in the right place. If it's on the wrong set of pins, you'll get this error over and over and over since the BIOS is clearing CMOS when it sees the jumper installed.
Originally posted by m³ñ
If the CMOS jumper is in the 'Clear CMOS' setting, the board will simply not boot. That's experience, some boards might try booting?
Originally posted by PurduEE
Depends on how the BIOS is coded. Some do, some don't.
On some BIOSes, the code is written to check for the presence of the jumper during POST. If it finds the jumper, it will mark the CMOS checksum bit, indicating a bad checksum, and then complete the boot. Others won't. It's still worth checking on the chance that he has a board that has the behavior I described rather than the behavior you described. Might as well 'leave no stone unturned'.
To be honest, there are very little absolutes when dealing with different motherboards and BIOSes. There's no guarantee that they are all going to work the same way, and in point of fact, most of the time they don't.