chipset temps too high?

[HardyOne]

I have a Fanmaster that has 4 thermocouples and can control 4 fans. The one temp reading that I am wondering about is the chipset. The thermocouple is taped to the top of the center of the chipset and it can run at about 40°C while idling and doing light computing. However, when I run DVD copying and other heavy computing (Prime95 etc) the chipset goes up to 50°C. Is this too high?
BTW - the CPU idles at 30°C and will go up to about 40°C.

 

[doox00]

50c is fine for a nf4 chipset.

 

[Asian Dub Foundation]

taht about what im getting too, so ur fine

 

[TheRapture]

50c is fine, even GREAT...

 

[omz]

well im not sure about premiums but that shud be ok
my dfi idles at about 50/51C (fan running at about 80%) and loads at about 57C (fan running at 127%) so yeah, im pretty sure u'll be ok

 

[SpoogeMonkey]

If you're concerned about the temps, place a 120mm fan on the bottom of the case to blow over the chipset. This dropped my temps by ~14c. Not to mention quieted the little screamer of a fan on the dfi chipset.