![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Chieftech/Chienming/Antec Case Gallery
- Thread starter ch0s3npimp
- Start date
First off, Sweet comp HAL!!! im jealous! Everyone has some sweet rigs, its always a joy to look at everyone's computers. Here is my Chenminger, lol!
Sorry about the mess, I recently bought a HD, and threw it in there, disregarding the cable management, Ill give it a fix this weekend, and repost my new pics! Also sorry about the dustiness of the innerds, I hate dust!!!
Sorry about the mess, I recently bought a HD, and threw it in there, disregarding the cable management, Ill give it a fix this weekend, and repost my new pics! Also sorry about the dustiness of the innerds, I hate dust!!!
- Joined
- Dec 28, 2004
- Messages
- 6,088
^^
you think that's messy wiring? ROFL. You would fall down and have a stroke if I showed pics of the inside of my Chenming.
you think that's messy wiring? ROFL. You would fall down and have a stroke if I showed pics of the inside of my Chenming.
Borgschulze
2[H]4U
- Joined
- Feb 28, 2005
- Messages
- 3,579
Not really a picture of my case... but it's there, and it's large.
Chieftec Matrix Series (Charcoal Grey)
Purchased it for $37.99 from Tiger-Direct In-Store deal.
Chieftec Matrix Series (Charcoal Grey)
Purchased it for $37.99 from Tiger-Direct In-Store deal.
Borgschulze
2[H]4U
- Joined
- Feb 28, 2005
- Messages
- 3,579
The Antec website?
Nothin special, I got kinda of to busy for case modding, so my dimond Tread plate case mod has been collecting dust in the garage for a wile now. This case is my temp case untill i get-r-done. Allthough after adding the handles, 120mm to the front, and the homebrew HDD cage so my case can hold all 5 HDDs I have grown to really like this box for its functionality. Im going to add sounds dampering to it next.
I(illa Bee said:
haha I love his new Cybershot though, you can see it in the shelf under the computer case.
I know i do have a lot going on int hat one corner. I wish i would have taken pics of the rest of the room, because its pretty plain. Just my bed in the middle, closet, shotglass collection on the wall, a british red ensign flag on the wall, and my 4 fraternity composits. And thats about it!
(cf)Eclipse
Freelance Overclocker
- Joined
- Feb 18, 2003
- Messages
- 30,027
tehehehe
CCUABIDExORxDIE
2[H]4U
- Joined
- Jan 30, 2005
- Messages
- 2,957
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
*hopes face punch is emitted*
jk.
*hopes face punch is emitted*
jk.
(cf)Eclipse
Freelance Overclocker
- Joined
- Feb 18, 2003
- Messages
- 30,027
pfsh, don't underestimate me54YW4T said:
Wow you guys really think that the NF7-S is a good board. I have one and I had much better luck running my ASUS A7V266-C. The Abit has caused me nothing but problems from day one, but its one of those things that it will fix itself for awhile and then suddenly, it decides to take a shit. On top of that I opened the case the other day to do my monthy cleaning and noticed that the northbridge fan had stopped. It is completely dead, unfortunately, and I really see no reason to fix it as I will be building a new computer fairly soon here.
But here is an example of something that seems to happen for about a week once every couple of months. I will get spontaneous shutdowns. When I go and check the Abit log to see what all the voltages are at to try and figure out what went wrong, they are all fine usually within +/- .05v. Now to my knowledge that isnt enough to cause the shutdowns. I have nothing specific I am doing, I can be playing a game, writing a paper, checking my email, it is truly random. I have pulled of the heatsink and reapplied thermal paste thinking maybe i had put too much on the first time. I dont overclock (I have a 2100+ pally)and dont have anything major running off my plugs or in my computer. The only reason I changed from my Asus 266 was because I had planned on getting a Barton to add to the NF7 but never got around to it, and then had a family set back that didnt allow it.
Anyways any suggestions on the above subject of the crashes/spontaneous shutdowns would be helpful.
It is completely dead, unfortunately, and I really see no reason to fix it as I will be building a new computer fairly soon here.But here is an example of something that seems to happen for about a week once every couple of months. I will get spontaneous shutdowns. When I go and check the Abit log to see what all the voltages are at to try and figure out what went wrong, they are all fine usually within +/- .05v. Now to my knowledge that isnt enough to cause the shutdowns. I have nothing specific I am doing, I can be playing a game, writing a paper, checking my email, it is truly random. I have pulled of the heatsink and reapplied thermal paste thinking maybe i had put too much on the first time. I dont overclock (I have a 2100+ pally)and dont have anything major running off my plugs or in my computer. The only reason I changed from my Asus 266 was because I had planned on getting a Barton to add to the NF7 but never got around to it, and then had a family set back that didnt allow it.
Anyways any suggestions on the above subject of the crashes/spontaneous shutdowns would be helpful.
Sounds like you got one of a very few bum boards or its "user error" of some kinds. The Nf7s were great boards (the latest Nf7-S2's sucked ass)
Also not that he dose not have a NF7 and note that I wasnt talking about a NF7. Im talking about the board he has, the AN7.... Witch was one of the best socket A baords ever. (next to the DFI offerings)
Also not that he dose not have a NF7 and note that I wasnt talking about a NF7. Im talking about the board he has, the AN7.... Witch was one of the best socket A baords ever. (next to the DFI offerings)
g33zy
Goes Down Easy
- Joined
- Apr 19, 2005
- Messages
- 3,227
Rezistor said:
- Joined
- Apr 10, 2005
- Messages
- 17,200
^^ looks like one.. that had sex with a DJ coffin. heh.. pretty groovy though.. and props to Rezistor, that's one clean tight lookin' loop.. and love the lcd implementation.
EDIT: ok, wow, this is like my 1st ever modding attempt, a comp from 2002 I think.. so be gentle with "clean that wiring up" remarks. heh.. Anyways, 2002 is when I got the case, then got a windowed side for it the next year.. anyways.. it was an xp2100 on an MSI K7N2-L with 1gb corsair and a 9700 pro.. adaptech raid card, 4x60gb drives RAID0+1 and one 80gb system drive. woooooooo! hot shit for that day.
I later slapped an xp2600 in there and a 6600 GT and it's STILL ALIVE! lol. I am typing on it right now.. heh
heh.. pretty groovy though.. and props to Rezistor, that's one clean tight lookin' loop.. and love the lcd implementation. EDIT: ok, wow, this is like my 1st ever modding attempt, a comp from 2002 I think.. so be gentle with "clean that wiring up" remarks. heh.. Anyways, 2002 is when I got the case, then got a windowed side for it the next year.. anyways.. it was an xp2100 on an MSI K7N2-L with 1gb corsair and a 9700 pro.. adaptech raid card, 4x60gb drives RAID0+1 and one 80gb system drive. woooooooo! hot shit for that day.
I later slapped an xp2600 in there and a 6600 GT and it's STILL ALIVE! lol. I am typing on it right now.. heh
- Joined
- Dec 28, 2004
- Messages
- 6,088
Sweet case Slacker.
ATTENTION ALL CHIEFTEC/ANTEC/CHENMING OWNERS!!
IM IN REAL NEED OF A 80MM FAN BRACKET/HOLDER THAT THESE CASES COME WITH, IF YOU HAVE AN EXTRA ONE YOU DONT USE PLEASE PM ME I'LL BUY IT OFF YOU.[/COLOR]
If these type of responses are not allowed mods feel free to remove them, sorry.
IM IN REAL NEED OF A 80MM FAN BRACKET/HOLDER THAT THESE CASES COME WITH, IF YOU HAVE AN EXTRA ONE YOU DONT USE PLEASE PM ME I'LL BUY IT OFF YOU.[/COLOR]
If these type of responses are not allowed mods feel free to remove them, sorry.
You can buy it from Antec http://www.antec.com/Detail.bok?no=248SpinMedia said: