First off, this board is horrible. Manual is terribly written. There is virtually no support on the chaintech website or on Nvidias. Board will work with my Corsair XMS3200 c2 v1.2 ram but not an old stick of the same that is v1.1 (which upset me immensely). Anyways......
I cannot get the SATA drive recognized. There is nothing for SATA or SCSI or OnBoard Controller in the BIOS. There is no Raid Bios for the SATA chipset (Silicon Imagine 3114). I've flashed the chaintech to the latest bios to no avail. Windows 2000 install doesn't recognize the drive, even when I pop in the floppy to install the SIL drivers per usual. I'm going to attempt using the Seagate Disk Utility after work to see if I can at least find the drive and perhaps format it.
Has anyone else delved into this POS board? Any ideas on getting the SATA to work. All cables are new (not nicked or anything), power adapter is setup (the PSU is sata ready anyways), everything is hooked up correctly (i get post, drive is warm and spins). Please help me get this sexy AMD64 system rolling.
I cannot get the SATA drive recognized. There is nothing for SATA or SCSI or OnBoard Controller in the BIOS. There is no Raid Bios for the SATA chipset (Silicon Imagine 3114). I've flashed the chaintech to the latest bios to no avail. Windows 2000 install doesn't recognize the drive, even when I pop in the floppy to install the SIL drivers per usual. I'm going to attempt using the Seagate Disk Utility after work to see if I can at least find the drive and perhaps format it.
Has anyone else delved into this POS board? Any ideas on getting the SATA to work. All cables are new (not nicked or anything), power adapter is setup (the PSU is sata ready anyways), everything is hooked up correctly (i get post, drive is warm and spins). Please help me get this sexy AMD64 system rolling.