Can't figure out what the problem is...

TheMead

Weaksauce
Joined
Dec 10, 2007
Messages
96
The problem: I can't get a system to post with a new (to me) Processor, runs fine on still with the previous one.

Hardware:
Abit AN8 SLI v1.0 mobo (939) updated to the newest Bios
Processor I am replacing :Athlon64 3500+
Processor I trying to upgrade to: Opteron 165

Details:
After installing the new CPU, clearing the cmos, and turning on the power the system shuts down after a few seconds. The LED post code display shows 8.4. which the manual says "DDR voltage ready". I get the same result with everything disconnected from the motherboard (drives, video card, sound card, network, and all usb devices.) I have tried booting with only one all my sticks of ram, and even a stick of ram from another computer in the house, still the same result.

anyone have a clue to what my issue is?
 
It may be the heatsink isnt well fitted but it sounds like you know what you are doing.
Try manually setting the default voltage and FSB for that CPU.
Other than that, the Opteron sounds bad.
 
Back
Top