Cant boot with new Mobo/CPU/Ram

Triz08

Limp Gawd
Joined
Sep 18, 2005
Messages
266
Well I just recieved my Asus p5n32-e sli plus, c2d e6420, and 2 gigs of G Skill HZ. So I go and install the new rig and I cant get it to boot up at all. The motherboard lights up, fans come on, but my monitor just stays in sleep mode. Theres no beeps and it doesnt sound like my hard drives are seeking. Ive checked that everything is seated properly and even tried removing all extra parts that werent needed. Everything I try it results in the same problem.

Now, ive come to the conclusion that either my motherboard or cpu is dead. I ended up running the cpu with the heatsink off, and it barely heats up whatsoever. I know its supposed to burn the chip pretty quick running it like that, but it stays pretty much normal temperature.

Please if anyone can give me some advice, it would greatly help me out. I have the cpu and mobo packed up getting ready to RMA them both unless I can find a way to tell what the problem is.

Thanks for your time
 
Yeah try to assemble the PC outside of the case to make sure that the case isn't shorting out the mobo.
 
I tried that already. Out of the case, 1 stick of ram, and 1 video card connected. Same results =(
 
Im guessing the mobo is dead. Unless I crushed the cpu somehow when installing the thermalright ultra-120. Though I thought I was being fairly gentle when installing it.
 
Try another PSU, and make sure you have all the power cables plugged in properly. If that doesnt work, try re-seating the CPU. If that doesn't work, find another board you can test with, lol. Does the mobo beep with no ram inserted when you try to power it on?
 
Well I eventually got it fixed!!!! Last night I spent about an hour just placing ram in different spots and rebooting about 100 times one after another. Eventually it just posted and got me into bios! I quickly changed my ram settings to manual timing and manual voltages and now everything is 100% rock stable and solid.

Ive been playing with the overclock for for the past 30 minutes and I already got my rig up to 3480mhz stable 4-4-4-12 2t stable.

Getting 14122 marks in 3DMark06 compared to my old cpu/mobo/ram was getting 8150. Couldnt be any more happy =) Thanks for your suggestions guys!
 
Back
Top