Building New PC (on budget)

supremeone

Limp Gawd
Joined
May 17, 2007
Messages
141
Hi, I've been preparing to upgrade pc for around 2-3 weeks, checking out products here and there etc. And feel somewhat comfortable with what I want to get. But I'd like any suggestions as long as it doesn't make the price go over $450ish. Basically I prefer paying closer to $400 instead of $500, but I might be willing to shell out a little more. I want to order it in the next few days or so, but definitely within a week.

My current system is amd 2500+ (1.8ghz) and 512 mb of ram, asus a7ndeluxe and a soyo case. Mouse, keyboard, speakers, and monitor will be kept the same ;o I'm mostly going for a overall pc performance, not really gaming performance. I do game a bit, but not that often. I'm more interested in how well pc handles multi tasking and how fast it can load apps and run them.

I feel pretty content with most of the options I picked out right now, except power supply is a little tricky for me. I think 430 watts with a 80%+ efficiency should be enough, but one of my friends said 500 watts would be better but I don't know, if anyone can shed any light on this, I'd appreciate it. So heres the specs:

COOLER MASTER Centurion 5 CAC-T05-UW Black Aluminum Bezel , SECC Chassis ATX Mid Tower Computer Case - $49.99 (Free shipping)
Antec earthwatts EA430 ATX12V v2.0 430W Power Supply - $59.99 (Free shipping)
GIGABYTE GA-P35-DS3L LGA 775 Intel P35 ATX Intel Motherboard - $93.19 (with shipping)
Intel Dual-Core E2160 Allendale 1.8GHz LGA 775 Processor - $82.99 (Free shipping)
G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) - $48.99 (Free shipping)
EVGA 256-P2-N751-TR GeForce 8600GT 256MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card - $90 After Rebate

Total comes to around $425. Actually forgot to subtract rebates from the psu ($30) and the case ($15) so like $380 actually.
 
that power supply would be fine for what you have listed

for another $45 you could get the e4500 which overclock relatively well and easily
 
how much could the e4500 overclock too on stock cooling? I was planning on overclocking the 2160 to maybe 2.6 or 2.7ghz, I figure that's good enough. Pc I'm on now is decent with 1.8ghz so I think anything over 2ghz would be fast. I doubt I could get over 3ghz unless I purchased extra cooling stuff to get that, and might be overkill for my needs ;o But I don't know.

Anyone know how far the 2160 and e4500 can oc on stock cooling? I'd think anything over 3ghz would need a new heat sink or better thermal paste etc.
 
Well an athlon 2500+ and an intel dual core processor are two very very different things. Even at the same speed the dual core would be a much faster processor.

People reach 3.0ghz quite commonly on the e4500 with air cooling, but of course it all depends on how well of an overclocker you are, how far you are willing to push it, other hardware, etc...
 
I tried overclocking my geforce 2 400mx once, but then it ended up dying :( Haven't really overclocked much besides that so I guess I'm a novice in that department. But I'm gonna lookup some comparisons between the e2160 and e4500, see if it's worth the extra $45 :eek:

Glad you think the psu is good vtx :) Read a lot of good reviews too, plus it's like the cheapest 80%+ efficiency psu you can get with the exception of the 380 watt earthwatts. I'm just going to checkout a few more psu's in the budget price range, but I think I'll stick with earthwatts, as everything I've read seems positive, and antec is a quality company.

But feel free to post any suggestions/comments. I'm still new at this :eek:
 
I'm just wondering about where AMD x2's fit in versus the E2xxx series. I like the AMDs have VT (virtualization technology) whilst lower-end Intel's do not. I'd only use VT 10% of the time at best, for testing OS's...so AMD appeals to me in that regard. BUT, intel's are better for multimedia and for overclocking.

So, thoughts for E2xx and e4xx not having VT as compared to AMD?
 
But I'm gonna lookup some comparisons between the e2160 and e4500, see if it's worth the extra $45 :eek:

Glad you think the psu is good vtx :) Read a lot of good reviews too, plus it's like the cheapest 80%+ efficiency psu you can get with the exception of the 380 watt earthwatts. I'm just going to checkout a few more psu's in the budget price range, but I think I'll stick with earthwatts, as everything I've read seems positive, and antec is a quality company.:eek:

Many people get the e4500s to 3.0ghz pretty easily on stock cooling

I am thinking of getting the same psu for my new build, especially now since it is $30 after MIR
 
yeah but you have to order it today and i'm still on the fence, because one of my friends keeps telling me that 400 some watts isn't enough and that I should get 500 watts. I'm guessing to ensure my pc will be able to handle future power demands of video cards or quad core cpu's or whatever. But I doubt I'll even consider anything of the sort, except maybe a video card in 6 months to a year, but even then I'm not too sure. I've stuck with a lot of the same parts I have now for 2-3 years.

Was checking out this other psu a friend recommended:
SeaSonic SS-500ES ATX12V/V2.2

Now I'm not too sure what to do atm. If 500 watts matters a lot, should I get the seasonic or the antec one? Seasonic has no modular cables, but not sure what that means and I think Seasonic has only 2 sata connections and antec has 4 but i don't think that would matter too much for me, I usually only use 1-2 hd's at the most. Also Antec is like $90. But there was a $40 rebate offered a few days ago, maybe I could wait for another rebate. Or if 500 watts is a bit overkill, than I could settle for the 430 watt one. Seems like a solid product for a psu.

Btw chrispycrunch, not too sure what virtualization is, read about it somewhere but don't remember it being too significant. But you should read this article. Was pretty informative since at the outset, I was trying to lookup comparison between e2160 vs e4500 but this one does e2160 vs. 6300 and 2160 is very comparable. I'm very excited about getting nearly equal performance for half the price :D

e2160 vs. e6300
 
Haven't played around with virtualization so I can't comment on AMD VT and the lack of VT on the low end C2Ds

Anyway, remember that wattage doesn't mean as much these days. What matters most is where those watts are being delivered. For current rigs, it's all about how much amps are on the +12V rail since most PC parts draw their power from there. You determine the amperage on the +12V rails by first finding out what's the total combined wattage set aside or the the max wattage for the +12V rails alone. So for example, the Antec Earthwatts 430W has 360W on the +12V rail. Divide that total wattage for the +12V by 12 and you get how much amps the PSU has on the +12V rail. In this case, 360W divided by 12 is 30A. So the Antec Earthwatts 430W PSU has 30A on the +12V Rail. And that's plenty of power for your current system.

For comparison, that Seasonic PSU that your friend recommended has 34A on the +12V Rail and the Antec Earthwatts 500W has 34A on the +12V Rail. So if you want a bit more headroom for future upgrades, get that Seasonic PSU since it is cheaper than the Antec Earthwatts 500W.
 
Read Danny's post twice.

There's 30A on the +12V rail on that Earthwatts 430W!!! Thats plenty of power for a modern system -- even if you upgrade to an 8800GTS 512MB and then some! Considering the price of $30AR, I'd definately go for the EA430 instead of the Seasonic 500W. FYI, the Earthwatts line of PSUs are supplied by Seasonic. Hence, the 500W Earthwatts' performance numbers look strikingly similar to the Seasonic model.

Oh, and stick to the E2160 if you want to save cash... the less cache accounts for only about a 10% performance hit.
 
Yeah I'm thinking 430 watts is fine. Just don't think it'd be enough for a 8800 gt in the future, if i was using 2 harddrives. Atleast according to NewEgg Psu Calc. Not that it really matters to me, since I don't see myself upgrading to a 8800 in the near future, maybe after a year at the earliest and I'd say 2-3 years at the most. And I'd hope there'd be more power efficient cards by 1-2 years that are close in performance to the 8800 gt if not better.

And maybe I would do a complete upgrade by then anyways ;o Or would want to upgrade psu anyways, I don't know. It's pretty much all contingent on the video card and if I will use 2 harddrives or not. Atm a 8800 gt and 2 harddrives is like 453 watts or so, not including fan power and stuff.

But ya I think I might get the 430 watts just because of no present plans to get a 8800 gt so i should be fine, even though it would give you more security and peace of mind to have 500 watts and know your system can handle mostly anything.
 
How did you get 453W out of 8800GT and 2 HDD?? That's very inflated.
 
enginurd so are you saying the amps matter more? and the distribution of the amps on the rails right? I still can't piece together how significant the wattage is than. I find this area the most perplexing of all the components.

And danny, i just entered core2duo regular series, regular mobo, 1 dvd-rom, 1gbx2 for ram, 2 harddrives @ 7200rpm, and 8800gtx series card, and it came up with 453 watts. But since wattage isn't everything, it kinda seems like the 430 watt earthwatts could handle all that.

Anyways, like i said though, not really focused on getting a high end video card anytime soon, so 430 watts should be enough. But do the length of the power cables come into play much? Or not really. And how much extra power does overclocking take up?
 
Btw can anyone tell me real fast if earthwatts psu will definitey work with the gigabyte mobo? Any problems with the pin connector or anything? Was reading about issues some mobo/psu's have with not having the right 4 pin or 8 pin connector. Seems like it would
 
ok cool ordered that. Btw another question I have is about the video card. I was thinking of getting the 8600 gt, but my friend pointed out theres deals for a 7900 gs for around $100. You think I should try and do that? Only has a 90 day warranty though. Or should I try and score one on ebay maybe for $70 total or something.

What would you guys do in a situation like this? 7900gs is a good oc'er and it's comparable to a 1950pro :eek: But maybe getting it is overkill, and 90 day warranty still kinda worries me. Or maybe I should wait another day or two and see if theres any good christmas deals for a video card :d
 
Hmm, what about ram? I've seen ocz on sale for like $30ish after rebate.. and crucial and gskillz at $50. Does it really matter? Because I think if you want to oc your cpu, you have to also do it for your ram. So do all of them overclock good? And is there one more reliable than the others?
 
As for the RAM and OC'ing, it kinda depends on the CPU. Which CPU did you choose?
 
going with the intel e2160 :eek: so far ordered the case and the powwersupply

going to order cpu/mobo next. Just reading this one roundup of the mobos that shows how good they overclock and other things. I think abit is supposingly a better overclocker, but i think gigabyte should be fine since i'm not an extreme oc'er.
 
hmm don't think i mentioned this. But I do have 2 internal ide drives a the moment, as well as a ide dvd burner. And I hear the gigabyte mobo only has 1 ide controller. I wasn't really planning on purchasing a harddrive this early but sounds like I don't really have a choice. Unless I buy an addon ide controller, but not sure how much that is or how many ide devices it supports.

Edit: and i also have a ide floppy drive but floppy drives seem obsolete so hmmm. And was checking out some of the ide controller cards and though they seem ok, i think it might be better if i bought a 250 gig drive, would end up only costing around $40-$50 more and would get 100 gigs of extra space so wouldn't be a bad situation, although I usually like having 2 drives split the load ;o
 
A PCI IDE card is less expensive than a new HDD. PCI IDE controller cards should be found for around $10USD. Here's an egghunt for you:
http://www.newegg.com/Product/Produ...ription=pci+ide&name=Controllers+/+RAID+Cards

Although, a new HDD would be optimal, since it will most likely be faster than your older IDE drives. I'd go for a Seagate 7200.10 250GB or 320GB drive for around $60 unless you can find a better deal. Check Frys.com, I think they have a 320GB 'cuda for $70.

The E2160 is a good choice. If you want to OC your CPU to anything under 3.6Ghz, all you need is DDR2-800. The chip most likely won't reach that high, but it should reach 3Ghz.

/*------------- <cut n paste> -------------*/
Formulas for Intel platform @ 1:1 settings: (base FSB speed is SDR, or single data rate)
c × [Base FSB speed] = CPU Clock speed (c = CPU Multiplier)
2 × [Base FSB speed] = RAM speed (DDR: double data rate)
4 × [Base FSB speed] = Effective FSB speed (QDR: quad data rate)

On Intel platforms, running the RAM higher than a 1:1 ratio with the CPU is, for the most part, useless, so don't bother trying to do so. If the BIOS does it for you, just let it. All you need is a 1:1 config, though. Here's some possible clock speeds (as always with OC'ing, your results will vary):

E2160: 9 × 200 = 1.8Ghz, DDR2-400 << STOCK speeds
E2160: 9 × 266 = 2.4Ghz, DDR2-533 << Simple OC
E2160: 9 × 333 = 3.0Ghz, DDR2-667 << Nice OC
E2160: 9 × 378 = 3.4Ghz, DDR2-756 << Great OC, near its max on good air
/*------------- </cut n paste> -------------*/
 
+1 on above reply
that's exactly what I did, long live my Caviar IDE HDDs! :)

I got this one, because it had 2 slots for PATA, and it supports ATAPI, which the RAID version of the card does not.
 
thx enginurd. being new to oc'ing, I didn't quite understand the relationship between the ram and the cpu during an oc. And also I think I'm going to purchase the harddrive. But going to get a 250 gig drive. I figured it'll cost me around $20 for a raid controller card, and a new hd would only cost me $50 more than that and i'd get around 100 gigs more and possibly a more reliable hd with the perpendicular recording technology.

So basically, the only things left to worry about for me are a video card, ram, and a harddrive. Having a hard time picking the right harddrive. Don't want it to fail or anything.

Harddrive - Spinpoint drives look ok, and so do western digital caviar drives, but seagate seems to be the only ones I see that say they have perpendicular recording, and say it has less moving points which seems optimal. So Seagate is probably best bet? There's a lot of options overall though :eek: Theres this drive and this one. Both seem the same except the first one seems to be $5 cheaper and has a higher model number, but I don't know. Also the wd caviar drives have this feature: SecurePark - Parks the recording heads off the disk surface during spin up, spin down and when the drive is off. This ensures the recording head never touches the disk surface resulting in improved long term reliability due to less head wear, and improved non- operational shock tolerance.. Any ideas what I should do? My default choice would be the 1st seagate drive.

RAM - Well gskillz seems fine, but what about the ocz memory? Does it really matter much which one you get?

Videocard - well since i'm buying a hd, I decided to go cheaper on the video card. Instead of a evga 8600 gt card, I'm thinking of getting the xfv 7600 gt. Seems to play most games just fine, nothing spectacular but it mimics my needs. Was at first thinking of getting a powercolor x1650xt, which almost matches the 7600 in most games, but I think going with nvidia is better since their drives are generally superior.

Cooling - should i get any thermal compound? I only want to o/c the pc somewhere in the range from 2.6ghz to 3.0ghz, whatever is stable on stock cooling, but if I can't get to 3.0ghz on stock cooling, than I don't know, thermal paste might be more appealing than I originally thought. Hmm I didn't mention this but the case I got wasn't the centurion, I ended up getting the cm-690, which I believe has better airflow etc. So that might mean stock cooling would be sufficient. I mean the e2160 does come with it's own thermal paste and heatsink right?

Any comments on this are appreciated. I'm not the most decisive person so feedback helps a lot ;o
 
I don't think you can go wrong with either Samsung, WD, nor Seagate, when choosing a HDD brand. Hitachi is also a trusted brand. Maxtor is now owned by seagate, but I still won't trust their drives, lol. Samsung and WDs are quiet. Seagates are a bit faster. Hitachi's run hot in my experience. These are the drives I've used lately:

Avg Transfer Rate, Access Time: HDD info, Price
112MB/s, 13.2ms: RAID0 'cuda's, 600GB total, $120 (ICH9R on P35-DS3R)
78MB/s, 08.2ms: WD Raptor WD1500ADFD 150GB, $160
76MB/s, 13.7ms: WD Caviar SE16 WD7500AAKS 750GB, $150
72MB/s, 15.4ms: Seagate Barracuda 7200.10 ST3250410AS 250GB, $65
68MB/s, 13.3ms: Seagate Barracuda 7200.10 ST3320620AS 320GB, $60
65MB/s, 13.7ms: Seagate Barracuda 7200.10 ST3320620AS 320GB, $80
65MB/s, 13.2ms: Seagate Barracuda 7200.10 ST3300620AS 300GB, $60
63MB/s, 13.4ms: WD Caviar SE16 WD5000AAKS 500GB, $100
62MB/s, 15.3ms: Samsung HD501LJ 500GB, $105
52MB/s, 14.0ms: WD Caviar SE16 WD2500KS 250GB, $70

OCZ is fine. My main advice with RAM is...
You won't notice the difference between CL4 and CL5, unless you're running benchmarks (and even then, its negligible), so don't pay a huge price premium for lower latency.

Vidcard... hm... what does your full build list look like again? Please list what's been ordered and what you plan to order. I'd try for at least a 7900GS or X1950GT. What size monitor do you have again?

Yes, the E2160 does come with a stock Intel cooler that you can use up until around 3Ghz. Good airflow isn't a replacement for a good CPU cooler. So, when you get a chance, pickup a 3rd party cooler if your temps with the stock cooler are too high. The Cooler Master TX2 often goes on sale for $1AR, lol.
 
HDD -> As for brand, look at the number of reviews and rank on newegg, one's that are over 1000 reviews. The bad ones always get weeded out. I always keep the space limited to 320GB or less. I don't use RAID though. So if I loose a drive for whatever reason, I don't want to be loosing a 500GB of data.

RAM -> I've always looked for a thread for the particular motherboard I choose and ask what is the more popular brand. But, more importantly, which brands cause more problems.

VID -> what is your budget on this? Newegg has a xfx 8600gt 512mb gddr3 for $120 shipped, and you can OC it yourself painlessly with atitool. I also saw a review this morning about cards under $80 that have DX10.

COOLING -> Watch for deals. You don't have to get one now if you only plan to go for 3ghz. I got my CM GeminII for FREE after MIR :D. If you have any money left over after putting your build together, you'll want some different fans for your CM 690. The ones that come with it, while still useful, don't move a lot of air. You don't need a real high CFM either. I chose to go for bling over air flow myself, especially since the CM 690 has a lot of holes in it :). The case comes with a blue LED fan, which I still use, but relocated to the top of the case. But, I got 4 red ones, cuz I'm a buckeye fan.

*edit: Cable management, should go without saying, but, just as important. The CM 690 has some interesting placed holes in the motherboard tray, and a rather large space behind the tray because of the intented 80x25 fan under the cpu socket, that will allow for perfect cable management. I have 5 120mm fans, a GeminII with 2 more 120mm, 3 IDE HDDs, a IDE optical drive. I managed to make all of my cables, including the ones from the top panel, side panel, drives, and PSU, pratically dissappear. Not just neatly wrapped and tucked, I mean you can not see them. I will post pics of mine when I get home tonight to show you what I mean.
Some notes on the CM 690. Don't even attempt to use the plastic cable management clips. I unscrewed mine and threw them away first thing. And, if you have any IDE HDDs you will have to mod the back of the HDD tray a little to allow the them to fit as intended. All you have to do is bend the 90degree turn at the back of the tray back to straight. Why this detail escaped CM I don't know. I have a feeling that they didn't even attempt to fit an IDE drive in there. Neither the IDE cable nor the power cable clear this bend in the tray. But, it's not hard to do, just needs any size set of plyers, and with the motherboard side of the case closed you can't even see it, so no cosmetic damage either.
 
First off, thanks for the responses ;) Very helpful. And I ordered the cm-690 case and 430 watt psu (only one that arrived so far) and gigabyte mobo and e2160. And my monitor is 17" trinitron and maxes at 1280x1024 resolution. Just gotta order those 4 parts i talked about before. Glad I managed to get the cm-690 case instead of the centurion, and glad you've had a good experience with it thunder. Planning on ordering the remaining parts friday, and saturday/sunday at the latest, but hmm we'll see, sometimes I feel like waiting for deals but if the cooling option ends up being the paste, than I doubt i'll find any deal really for that, so I'll just order the other thing (heatsink) when I feel ready I guess.

Ok so far i'm thinking seagate for a 320 gig drive. Just because it seems like they use the perpendicular recording technology which means less moving parts. But i think it's a little more expensive. Caviar drive doesn't seem too bad like in the features tab, it showed Securepark, at one point, not sure if it was the 320 gig drive though ;o. Yeah I'm going to read some more reviews I guess, and check storagereview etc. Caviar drive is also cheaper too I think.

Not too sure about checking threads for the mobo, you mean on this forum? I guess i'll give that a try. Gskillz seems reliable from reviews and a lot of people who list it in their rig description.

For video card since I'm thinking of ordering the higher priced 320 gig instead of a 250 gig (since i see 250 gigs as a little outdated now ;(), so I'm aiming for around a $80 card. And for that a 7600 gt seems to fit the bill. Although a hd2600pro seems like a nice choice hmmm. Will have to think about it, not too sure yet how it even compares to a 7600 gt.

For cooling, I don't really understand what's more desireable to replace, the stock heatsink or the thermal paste. I've only just now read a few reviews for the artic silver 5 paste, seems like you can get away with using that combined with the stock heatsink. I figure I could always get a new heatsink/cooler when theres a good deal or I know what to look for (cooling options have been at the end of my list of things to research). Hopefully there'll be some deals, right now I mean coming from a 1.8ghz 2500+ pc, "single core" pc, I think I'll be fine if it was just at 1.8ghz for a good few months, but i'm thinking i can get the artic silver and maybe overclock it anywhere from 2.6ghz to 3.0ghz. Btw i'm wondering, my friend said I might not be able to o/c it to 3.0ghz because my ram might not be that good, not sure if he's right.

Also i ordered my mobo and cpu together, does stuff like that matter much? I read someone saying having a psu and video card delivered together is bad because the psu bangs up against the video card a little. So what combinations (if any) should I order the remaining parts? I hear the harddrives that are OEM come without any box so i'm a little worried about that ;o
 
gpureview.com is a good resource for vidcard info/reviews.

You can stick with the stock cooling for now, and even the stock thermal paste. When you find a good deal on a good cooler, pick it up along with some AS5. Its good to have some AS5 around in case you need to reseat the HSF.

As for ordering HDDs, zzf packs them better than newegg.
 
OK, so I exaggerated a little about not being able to see them at all. But, still just a fraction of them. :)

On this one you can see how I was able to route my PSU cables and IDE cables from my controller card all through a slot right behind the PSU. The 12v 4pin is hugging the motherboard and behind the PCI cards all the way to the top left corner. The rear fan 3pin runs the same route plugging in to a AUX fan spot on the motherboard. And, you can see the 24pin come from behind the motherboard tray on the middle right. The case switch and activity LED wires you can see come in from a little hole near the bottom right. The gemini fan's power is routed over top of the tray. I have the two fans on the front and the one on the side blowing in, the two on the gemini blowing toward the board (seems backwards, I know), the one on the back and up top blowing out. All I think I'm missing is a PCI slot cooler for my 8600.
1.jpg


Further away, but my camera was able to focus the shot better.
2.jpg
 
You're in no hurry to get aftermarket cooling. If you're able to OC your 2160 to speeds where temperature is your wall, you're going to be doing >3ghz. So, you'd be able to wait happily.

HDD really come down to personal experiences. I'm not sure if all drives have temperature sensors in them these days or not (mine are 3.5 years old), but my IDE caviars do. Not that it matters much. I mean, what are you going to do with knowledge of your HD temp??:confused: OEM harddrives are fine. You don't need a box unless there is a mail-in-rebate, in which case you'd need a UPC. But, then no one would offer a MIR on OEM, so you're good.

If you're aiming for 3ghz on a 2160. That comes out to 333mhz core speed. Which is stock for ddr2 667 (PC2 5300) at 1:1 ratio. So, as long as you get at least ddr2 667 you'll be able to clock your CPU to at least 3ghz. G.Skill, being brand name, will more than likely be able to overclock, at the least a little, to match your cpu clock if you reach > 3ghz. But, if you want to be 100% sure, get ddr2 800.

I always try to 'stack' shipping (order stuff together). Sometimes it'll save you a few dollars on shipping.
 
...I mean, what are you going to do with knowledge of your HD temp??:confused:

How else would you know if your drives are running too hot? And if they are running too hot, you can now do something about it, like add a front fan or a HDD fan. HDDs don't like heat either, so keeping them cool should be a priority. Voltage fluctuations and heat are leading causes of drive failures.
 
How else would you know if your drives are running too hot? And if they are running too hot, you can now do something about it, like add a front fan or a HDD fan. HDDs don't like heat either, so keeping them cool should be a priority. Voltage fluctuations and heat are leading causes of drive failures.

Oh, *shrugs* I've always put fans in front of my drives. Never having any problems with them is probably why I've never paid it much heed. Especially with the old school cheap cases, it was the only way to get air in the case without modding it.
 
Oh, *shrugs* I've always put fans in front of my drives. Never having any problems with them is probably why I've never paid it much heed. Especially with the old school cheap cases, it was the only way to get air in the case without modding it.

Many people don't even have an intake (or exhaust) fan in their system. :eek: ;)
 
nice pics thunder, i just got my case yesterday :) Really big box too, was caught a little off guard. Well hopefully a week from now, i'll be on a whole new machine, looking forward to it.

So hmm, thermal paste would be unnecessary? A lot of people say it prolongs the life of the processor and maybe other parts. Seems like it would be worth it since it's only $10. But how does a better heatsink compare to using a better thermal paste? I mean i notice the heatsinks seem to cost more, so I'm guessing those brand name heatsinks cool better. But since i only want to achieve around 3ghz, I only need a slight boost in cooling measures, if any. I also figure i'll order the last parts on monday because newegg has cybermonday which usually means some deals, maybe i'll get lucky :eek: i doubt it though

btw thunder, after reading that review you linked to, makes me consider the 2600 series more than before. But still tough to decide. Because it's like hmmmm you can find a xfx 7600 gt maybe for around $70-$80, but than you can find radeon 2600 pro's and even a xt, as well a 8600 gt for around $90, but usually only after rebates. Makes things a little harder to decide. Already have rebates to mail in from psu and case, so I guess 1 more wouldn't hurt. *sigh, not that easy of a choice, but 8600 gt from what I've seen consumes less power so that's a plus.

also, do any of you know how is it possible to setup a ps2 or xbox etc, to use your monitor as the video screen? I mean do you need a video card with a special cable or plug on it? thanks again
 
Whoah, wait, what? no. You need thermal paste, regardless of what HSF you use. Most HSFs come with thermal paste already. A good HSF needs good thermalpaste. If you use duct tape between the chip and the heatsink, I guarantee you the HSF would be useless. :p The stock Intel HSF comes with some thermal paste pre-applied. You can use that the first time if you like -- its much better than what they used to use (thermal pads, etc). Its also good to have a tube of AS5 around, in case you need to re-seat the HSF. For 3Ghz, you should be fine with the stock cooler.

Cyber Monday is the Monday after Black Friday... so its over already. :( Thats not to say Newegg won't have any deals... I'm just letting you know that CyberMonday'07 is in the past. ;)

As for using your monitor with a gaming console, most people do this if they have an input for the console on the monitor. For example, Dell Ultrasharp monitors usually have 4 inputs: VGA, DVI, S-Video, and Composite. So, you computer would go to DVI or VGA, and your game console would go to s-vid or composite.
 
damn, i have a old monitor :( , i only saw the power cable coming from it and what i'm guessing is the vga cable. That's why I figured I'd have to rely on the video card to take some input and than present it to the monitor via the vga cable. That's how I streamed video from pc to the tv one time. Hmmm oh wait that was video out. Yeah was just googling for this, seems like you need an adapter or a tv tuner card. Oh well, now the psp is looking more attractive.

Also, I thought I had to apply the thermal paste to the cpu and than apply the heatsink, but it's already done for you? :O Seems easier than I thought. Although kinda sucks if you want to put your own paste on it. Have to get rid of the existing one, and I read you can use rubbing alcohol but they have a specialized product for that, which seems tempting to buy, but costs extra. Although you might need a product like that anyways, but I guess it depends when you want to replace the heatsink or the cpu or mobo :d

Btw I saw this deal today, a 320 gig seagate drive for $60 but seems like the drive might be using that bad firmware, not sure. This thread here says they got one of those model drives and it had the bad firmware although that person doesn't see it as a complete detriment. So I'm wondering should I bite on this deal or no? Seems like you might not know what you'll get? Or maybe it was just frys selling the drives with the bad firmware. But also not sure if this drive has the perpendicular recording.
 
Back
Top